If the IndirectData option is also set, broadcast packets will only be sent to nodes which we have a meta connection to.
@end table
+@cindex BroadcastSubnet
+@item BroadcastSubnet = @var{address}[/@var{prefixlength}]
+Declares a broadcast subnet.
+Any packet with a destination address falling into such a subnet will be routed as a broadcast
+(provided all nodes have it declared).
+This is most useful to declare subnet broadcast addresses (e.g. 10.42.255.255),
+otherwise tinc won't know what to do with them.
+
+Note that global broadcast addresses (MAC ff:ff:ff:ff:ff:ff, IPv4 255.255.255.255),
+as well as multicast space (IPv4 224.0.0.0/4, IPv6 ff00::/8)
+are always considered broadcast addresses and don't need to be declared.
+
@cindex ConnectTo
@item ConnectTo = <@var{name}>
Specifies which other tinc daemon to connect to on startup.
Note that you can only use one device per daemon.
See also @ref{Device files}.
+@cindex DeviceStandby
+@item DeviceStandby = <yes | no> (no)
+When disabled, tinc calls @file{tinc-up} on startup, and @file{tinc-down} on shutdown.
+When enabled, tinc will only call @file{tinc-up} when at least one node is reachable,
+and will call @file{tinc-down} as soon as no nodes are reachable.
+On Windows, this also determines when the virtual network interface "cable" is "plugged".
+
@cindex DeviceType
@item DeviceType = <@var{type}> (platform dependent)
The type of the virtual network device.
and they only ConnectTo a third node outside the NAT,
which normally would prevent the peers from learning each other's LAN address.
-Currently, local discovery is implemented by sending broadcast packets to the LAN during path MTU discovery.
-This feature may not work in all possible situations.
+Currently, local discovery is implemented by sending some packets to the local address of the node during UDP discovery.
+This will not work with old nodes that don't transmit their local address.
@cindex LocalDiscoveryAddress
@item LocalDiscoveryAddress <@var{address}>
@file{@value{sysconfdir}/tinc/@var{netname}/hosts/} directory.
Setting this options also implicitly sets StrictSubnets.
+@cindex UDPDiscovey
+@item UDPDiscovery = <yes|no> (yes)
+When this option is enabled tinc will try to establish UDP connectivity to nodes,
+using TCP while it determines if a node is reachable over UDP. If it is disabled,
+tinc always assumes a node is reachable over UDP.
+Note that tinc will never use UDP with nodes that have TCPOnly enabled.
+
+@cindex UDPDiscoveryInterval
+@item UDPDiscoveryInterval = <seconds> (9)
+The minimum amount of time between sending UDP ping datagrams to test UDP connectivity.
+
+@cindex UDPDiscoveryTimeout
+@item UDPDiscoveryTimeout = <seconds> (30)
+If tinc doesn't receive any UDP ping replies over the specified interval,
+it will assume UDP communication is broken and will fall back to TCP.
+
@cindex UDPRcvBuf
@item UDPRcvBuf = <bytes> (OS default)
Sets the socket receive buffer size for the UDP socket, in bytes.