FW: Almost ...

[Matthijs Hoosemans]

OK and thx, but still not everything,

now you can ping from anywhere in A to router B
and from router B to anywhere in A
only the netwerk behind B is unreachable.

If I look at the routing tables to the tap0 device
I see that in both tables there's the line

10.0.0.0 * 255.0.0.0 tap0

must this line in routing Table A not be

10.2.0.0 * 255.0.0.0 tap0

(or maybe the other way around).

Matthijs Hoosemans

-----Original Message-----
From: owner-tinc at nl.linux.org [mailto:owner-tinc at nl.linux.org]On Behalf
Of Guus Sliepen
Sent: Wednesday, May 24, 2000 6:31 AM
To: Matthijs Hoosemans
Cc: tinc at nl.linux.org
Subject: RE: FW: Almost ...


On Wed, 24 May 2000, Guus Sliepen wrote:

> Everything is OK except on machine B:

> tap0      Link encap:Ethernet  HWaddr FE:FD:0A:02:00:9A
>           inet addr:10.0.0.154  Bcast:10.255.255.255  Mask:255.0.0.0

> HWaddr should be FE:FD:0A:00:00:9A.

Ehr, correction, inet addr should be 10.2.0.154 :).

Met vriendelijke groet,
Guus Sliepen.

-
Tinc:         Discussion list about the tinc VPN daemon
Archive:      http://mail.nl.linux.org/lists/
Tinc site:    http://ftp.nl.linux.org/pub/linux/tinc/

-
Tinc:         Discussion list about the tinc VPN daemon
Archive:      http://mail.nl.linux.org/lists/
Tinc site:    http://ftp.nl.linux.org/pub/linux/tinc/