need setup help
Jason Ostermann
jostermann at travnav.com
Tue Sep 12 04:20:55 CEST 2000
While I don't normally consider myself a clueless newbie, I'm quite lost
with tinc right now.
Situation: remote machine is the tinc server, let's say internet ip
148.94.168.23. (ip's changed to protect the guilty) It's name is Shire.
Local machine is tinc client, internet ip 205.64.36.65. It's name is
Gondor.
Here are the tinc.confs:
Shire:
ListenPort = 8080
MyOwnVPNIP = 192.168.111.1/24
VpnMask = 255.255.255.0
TapDevice = /dev/tap0
Passphrases=/etc/tinc/passphrases
Gondor:
ConnectTo = 148.94.168.23
ConnectPort=8080
MyOwnVPNIP = 192.168.111.2/24
VpnMask = 255.255.255.0
Passphrases=/etc/tinc/passphrases/
TapDevice=/dev/tap0
Ifconfigs:
Shire:
eth0 Link encap:Ethernet HWaddr 00:60:97:A2:00:34
inet addr:148.94.168.23 Bcast:148.94.168.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1471912 errors:0 dropped:0 overruns:0 frame:0
TX packets:2228760 errors:0 dropped:0 overruns:0 carrier:1
collisions:4035 txqueuelen:100
Interrupt:11 Base address:0xe000
tap0 Link encap:Ethernet HWaddr FD:F0:C0:A8:6F:01
inet addr:192.168.111.1 Bcast:192.168.111.255
Mask:255.255.255.0
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:265 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
Interrupt:5
Gondor:
eth0 Link encap:Ethernet HWaddr 00:20:78:16:69:8B
inet addr:205.64.36.65 Bcast:205.64.36.255
Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
RX packets:1340858 errors:0 dropped:0 overruns:0 frame:0
TX packets:535249 errors:0 dropped:0 overruns:0 carrier:0
collisions:4259 txqueuelen:100
Interrupt:17 Base address:0xef40
tap0 Link encap:Ethernet HWaddr FD:F0:C0:A8:6F:02
inet addr:192.168.111.2 Bcast:192.168.111.255
Mask:255.255.255.0
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
Interrupt:5
And routes:
shire:
148.94.168.23 0.0.0.0 255.255.255.0 U 0 0 0
eth0
192.168.111.0 0.0.0.0 255.255.255.0 U 0 0 0
tap0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0
lo
0.0.0.0 148.94.168.1 0.0.0.0 UG 1 0 0
eth0
gondor:
192.168.111.0 0.0.0.0 255.255.255.0 U 0 0 0
tap0
205.64.36.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0
lo
0.0.0.0 205.64.36.1 0.0.0.0 UG 0 0 0 eth0
I can apparently create the connection just fine (snippits from logs
coming in a second), but no data gets pushed. Each machine can ping
themselves on the tap device just fine, but can't ping each other.
Here's some /var/log/messages bits:
shire:
Sep 11 19:56:18 shire tinc[31989]: tincd 1.0pre2 (Sep 8 2000 11:13:43)
starting, debug level 2.
Sep 11 19:56:18 shire tinc[31989]: Generating 128 bits keys.
Sep 11 19:56:18 shire tinc[31989]: Ready: listening on port 8080.
Sep 11 19:56:35 shire tinc[31989]: Connection from 205.64.36.65:1609
Sep 11 19:56:36 shire tinc[31989]: Connection with 205.64.36.65
activated.
Sep 11 20:01:23 shire tinc[31989]: 192.168.111.2 wants to quit
Sep 11 20:05:32 shire tinc[31989]: Closing connection with 205.64.36.65.
Sep 11 20:09:26 shire tinc[31989]: Got TERM signal
Sep 11 20:09:26 shire tinc[31989]: Terminating.
Sep 11 20:09:26 shire tinc[31989]: Total bytes written: tap 5600, socket
4504; bytes read: tap 26280, socket 5376.
Gondor:
Sep 11 21:00:55 oddworld tinc[6729]: tincd 1.0pre2 (Sep 8 2000
12:03:59) starting, debug level 2.
Sep 11 21:00:55 oddworld tinc[6729]: Generating 128 bits keys.
Sep 11 21:00:55 oddworld tinc[6729]: Ready: listening on port 655.
Sep 11 21:00:55 oddworld tinc[6729]: Connected to 209.39.43.250:8080
Sep 11 21:00:59 oddworld tinc[6729]: Connection with 209.39.43.250
activated.
Sep 11 21:02:40 oddworld tinc[6729]: Got TERM signal
Sep 11 21:02:40 oddworld tinc[6729]: Terminating.
Sep 11 21:02:40 oddworld tinc[6729]: Total bytes written: tap 0, socket
1056; bytes read: tap 1100, socket 0.
What concerns me is the difference in bytes written lines.
I have both the netlink_dev and ethertap modules loaded.
Anyone have any ideas?
-
Tinc: Discussion list about the tinc VPN daemon
Archive: http://mail.nl.linux.org/lists/
Tinc site: http://ftp.nl.linux.org/pub/linux/tinc/
More information about the Tinc
mailing list