Routing in tinc pre5
Igor Belokopytov
igor.belokopytov at computalog.com
Tue Feb 26 19:59:34 CET 2002
HostC redirects log messages to HostA
[HostA]#tail -f /var/log/messages | grep tinc
( after [HostA]#./tinc-up)
HostA tinc.test4[12574]: tincd 1.0pre5 (Feb 21 2002 04:23:28) starting,
debug level 5
HostA tinc.test4[12574]: /dev/tap0 is a Linux ethertap device
HostA tinc.test4[12574]: Executing script tinc-up
HostA tinc.test4[12574]: Ready: listening on port 8195
( after [HostB]#./tinc-up)
HostA tinc.test4[12574]: Connection from 10.38.9.2 port 35621
HostA tinc.test4[12574]: Connection with HostB (10.38.9.2) activated
( after [HostC]#./tinc-up)
HostC tinc[11333]: tincd 1.0pre5 (Feb 21 2002 04:23:28) starting, debug
level 5
HostC tinc[11333]: /dev/tap0 is a Linux ethertap device
HostC tinc[11333]: Executing script tinc-up
HostC tinc[11333]: Ready: listening on port 8195
HostC tinc[11333]: Trying to connect to HostA (10.38.9.223)
HostC tinc[11333]: Connected to 10.38.9.223 port 8195
HostA tinc.test4[12574]: Connection from 10.38.9.221 port 4167
HostC tinc[11333]: Connection with HostA (10.38.9.223) activated
HostA tinc.test4[12574]: Connection with HostC (10.38.9.221) activated
( after [HostC#ping HostB)
HostC tinc[11333]: Sending packet of 98 bytes to HostB (10.38.9.2)
HostC tinc[11333]: No valid key known yet for HostB (10.38.9.2), queueing
packet
HostA tinc.test4[12574]: Got SEGV signal
HostA tinc.test4[12574]: Trying to re-execute in 5 seconds...
HostA tinc.test4[12574]: Closing connection with HostB (10.38.9.2)
HostA tinc.test4[12574]: Closing connection with HostC (10.38.9.221)
HostC tinc[11333]: Connection closed by HostA (10.38.9.223)
HostC tinc[11333]: Closing connection with HostA (10.38.9.223)
HostC tinc[11333]: Trying to re-establish outgoing connection in 5 seconds
HostA tinc.test4[12574]: Closing connection with HostA (MYSELF)
HostA tinc.test4[12574]: Executing script tinc-down
HostC tinc[11333]: Cannot route packet: unknown destination address
192.168.1.2
HostA tinc.test4[12579]: tincd 1.0pre5 (Feb 21 2002 04:23:28) starting,
debug level 5
HostA tinc.test4[12579]: /dev/tap0 is a Linux ethertap device
HostA tinc.test4[12579]: Executing script tinc-up
HostA tinc.test4[12579]: Ready: listening on port 8195
Regareds,
Igor Belokopytov
> On Tue, Feb 26, 2002 at 10:11:03AM -0700, Igor Belokopytov wrote:
>
> > pinging HostA <->HostB and HostA <-> HostC are Ok.
> > But if I try to ping HostC -> HostB I get:
> >
> > HostC tinc[11309]: Sending packet of 98 bytes to igor (10.38.9.2)
> > HostC tinc[11309]: No valid key known yet for igor (10.38.9.2),
> > queueing packet
> > HostA tinc.test4[12354]: Got SEGV signal
> > HostA tinc.test4[12354]: Trying to re-execute in 5 seconds...
>
> Could you run the tinc on HostA with debug level 5 as well, and send the
> log output directly prior to and including the SEGV?
>
> --
> Met vriendelijke groet / with kind regards,
> Guus Sliepen <guus at sliepen.warande.net>
>
> ------------------------------------------------------------------------
> Part 1.2Type: application/pgp-signature
Tinc: Discussion list about the tinc VPN daemon
Archive: http://mail.nl.linux.org/lists/
Tinc site: http://tinc.nl.linux.org/
More information about the Tinc
mailing list