Help with routing between Windows

[Robert Spraggs]

Hello,

I am having an issue with getting tinc to route the packets between 2 
Windows tinc installations. Here is what I have so far:

homeClient: Physical Interface: 192.168.6.50 gateway 192.168.6.102
homeClient: Tap-Win32 192.168.10.23 no gateway
homeClient file:
Address:192.168.6.50
Subnet=192.168.10.0/24

vpnoffice: Physical Interface 192.168.6.102 gateway 192.168.6.1
vpnoffice: Tap-Win32 192.168.98.10 no gateway
vpnoffice file:
Address = 192.168.6.102
Subnet = 192.168.98.0/24

I run tinc -n vpn -d5 -D on both machines and I can see them connect and 
everything seems to go right, but nothing is being captured by tinc in 
the homeClient VMWare instance. I see minimal activity when I Wireshark 
the interface also.

I have tried just about everything I can find and think of, but I am at 
a loss with this one.

Any help would be appreciated.

Robert