RESTART ---Help with routing between Windows
Guus Sliepen
guus at tinc-vpn.org
Fri Sep 25 23:32:56 CEST 2009
On Fri, Sep 25, 2009 at 12:54:46PM -0700, Robert Spraggs wrote:
> > > I get the following error on vpnoffice
> > > Cannot route packet from vpnoffice (MYSELF): unknown ipv4 destination address 10.5.255.255
> > >
> > You also need to change the IP address and the netmask of the TAP interfaces,
> > see my previous email.
>
> When I do that, the Windows complains about there being 2 interfaces
> with the same IP address. I ignore the error warning, start tinc and
> nothing happens on either side.
Hm, if the netmask of the TAP interfaces is set to 255.255.0.0 it should
work... otherwise go back to 10.* addresses, but then you also need to use
those addresses if you want packets to go via the VPN.
--
Met vriendelijke groet / with kind regards,
Guus Sliepen <guus at tinc-vpn.org>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://www.tinc-vpn.org/pipermail/tinc/attachments/20090925/e9bee466/attachment.pgp>
More information about the tinc
mailing list