Lion OS X tinc issues.

[Mike Bentzen]

Hi Matthew,

Did you compile from source, or did you use the macport instructions?
If you didn't use macports, have you installed tuntaposx?
The device should be tap0, not tun0.

Remove the Subnet variable from your laptop hosts file. It is not needed 
in switch mode.

I wouldn't worry about bridging yet, try to get the connection going 
with the tap0 device first.


Mike



On 11/04/2012 3:10 PM, Matthew Tolle wrote:
>
>
> Hi Folks,
>
> This has been driving me nuts all day. I've been unable to google 
> myself out of it. Maybe someone here can help?
>
> I followed the instructions from:
>
> http://www.tinc-vpn.org/examples/macbook-install/
>
> Ubuntu server <-> Ubuntu server works just fine with the same config. 
> Ubuntu server <-> Mac laptop not so much.
>
> The error I'm getting is:
>
> 2012-04-10 21:48:44 tinc.l3vpn[52621]: Error while writing to Generic 
> BSD tap device /dev/tun0: Input/output error
> 2012-04-10 21:48:44 tinc.l3vpn[52621]: Error while writing to Generic 
> BSD tap device /dev/tun0: Input/output error
> <lot of the same spew...>
>
> The error pops up after I try to get DHCP going over the link. 
> (ipconfig set tun0 DHCP). Not that it works before I try and do that.
>
> Both sides seems happily connected before issuing the DHCP command.
>
> I've tried just about everything I can think of for the configs. 
> Switch on, off, bridging on and off on the server side.. nothing seems 
> to work. I do find it odd that under linux the virtual device looks 
> like this:
>
> vpn       Link encap:Ethernet  HWaddr 4e:31:65:e7:32:f6
>           inet6 addr: fe80::4c32:66ff:fec6:32e7/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:1034 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:529919 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:500
>           RX bytes:87139 (87.1 KB)  TX bytes:56253688 (56.2 MB)
>
> standard kinds of goodness. On the Mac side it seems slim on info:
>
> tun0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         open (pid 57014)
>
> Makes me think that the tun/tap device is wonky?
>
> The Tun/Tap stuff I got from port as per the instructions.
>
> Configs:
>
> # cat tinc.conf
> Name = laptop
> Mode = switch
>
> # cat hosts/laptop
> Subnet = 10.20.20.0/24

Remove the Subnet variable. It is not needed in switch mode.

> Address = 10.20.20.38
>
> -----BEGIN RSA PUBLIC KEY-----
> <blahblahblah>
>
> # cat hosts/server
>
> -----BEGIN RSA PUBLIC KEY-----
> <blahblahblah>
> I figure it's something very simple that I'm missing. Can someone save 
> my sanity please?
>
> Thanks,
>
> -Matt
>
>
>
> _______________________________________________
> tinc mailing list
> tinc at tinc-vpn.org
> http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tinc-vpn.org/pipermail/tinc/attachments/20120411/6f900c57/attachment.html>