Network pause issue.

[Donald Pearson]

My 1st guess would be IP or MAC address conflicts.


On Tue, Jan 21, 2014 at 1:07 AM, Matthew Tolle <matt at night.com> wrote:

>
> Howdy Folks,
>
> I've got a 5 node setup here. My server "home" is the primary server that
> all other servers connect to. The configs on all the servers look like this:
>
> # cat /etc/tinc/home/hosts/node1
> Subnet  = 10.2.0.0/16
> Address = 192.168.2.1
>
> <RSA KEY>
>
> # cat /etc/tinc/home/hosts/node2
> Subnet  = 10.3.0.0/16
> Address = 192.168.3.1
>
> <RSA KEY>
>
> Etc. All the hosts are setup the same.
>
> # /sbin/tinc -n home dump subnets
> 10.1.0.0/16 owner home
> 10.2.0.0/16 owner node1
> 10.3.0.0/16 owner node2
> 10.4.0.0/16 owner node3
> 10.5.0.0/16 owner node4
>
> # cat /etc/tinc/home/tinc-up
> ifconfig $INTERFACE 10.2.0.10 netmask 255.0.0.0
> ifconfig $INTERFACE up
>
> # cat tinc.conf
> Name = node1
> ConnectTo = home
> Mode = router
> AddressFamily = ipv4
> PingInterval = 600
> PingTimeout = 15
>
> 4 out of 5 nodes work just fine. Node 2 however has issues. It does work
> fine for 5-30m and then pauses my connection to it. It's still up. I can't
> ping it over the "pause time" with 0% packet loss. Any TCP connection over
> the link just pauses for a while. The odd thing is it doesn't timeout. In
> an SSH session to the box over the tinc link I'll type "ps -ef" and 10m
> later I'll get the response. SSH should timeout way before then so I'm not
> sure what's going on. It's not like that all the time. I get maybe 15-30m
> when it's working just fine and then 10m of network pause. While my SSH
> session is paused I can see that the app on the server is talking to my
> primary node over the tunnel. That seems odd.
>
> The app on the node side seems happy and can reach everything it needs to.
> No sign of issue there. It only seems to be an issue over the tinc tunnel.
> It kind of feels like maybe something is routing the IP space in a
> different direction for a period of time and then it comes back. If that
> were the case my TCP ssh connection would timeout well before the
> connection returns to life.
>
> Has anyone seen anything like this? I've poked at a bunch of things to try
> and pinpoint the issue. So far no love.
>
> The routing table looks fine and the same on all of them:
>
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> 0.0.0.0         192.168.3.1     0.0.0.0         UG    0      0        0
> eth0
> 10.0.0.0        0.0.0.0         255.0.0.0       U     0      0        0
> home
> 192.168.3.0     0.0.0.0         255.255.255.0   U     0      0        0
> eth0
>
> Nothing else in node2's area uses 10. space.
>
> Any ideas I would appreciate it.
>
> Thanks,
>
> -Matt
> _______________________________________________
> tinc mailing list
> tinc at tinc-vpn.org
> http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tinc-vpn.org/pipermail/tinc/attachments/20140121/946a2562/attachment.html>