Network pause issue.

Sat Jan 25 16:54:45 CET 2014

I admit it's been a long time since I've used tinc so I'm pretty rusty, but
your config does seem a little odd to me.

You are in router mode, and defining /16 networks for each location, but
then bringing up the tinc interface for something with a /8.  From the
perspective of that interface then every 10.x.x.x address is a "peer" on a
LAN that can be reached via switching, not routing.

Maybe that has nothing to do with it though, and it is curious that only
one endpoint is impacted.

Does your vpn not work if you use a /16 in your tinc-up script?

On Tue, Jan 21, 2014 at 10:59 AM, Matthew Tolle <matt at night.com> wrote:

>
> Hi Donald,
>
> Thanks for the idea. I didn't even think about MAC conflicts. I checked
> all the servers that participate in the tinc network and they are
> different. The tunnel link all look like this:
>
> home Link encap:UNSPEC HWaddr
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
>
> Those links are POINTOPOINT connections so I think that's ok. I don't
> think I need to makeup and set a MAC address for each of those do I?
>
> I'll poke around and check the other servers at node2 site to see if there
> are any conflicts there.. but I doubt there is.
>
> -Matt
>
> On Jan 21, 2014, at 7:05 AM, Donald Pearson <donaldwhpearson at gmail.com>
> wrote:
>
> My 1st guess would be IP or MAC address conflicts.
>
>
> On Tue, Jan 21, 2014 at 1:07 AM, Matthew Tolle <matt at night.com> wrote:
>
>>
>> Howdy Folks,
>>
>> I've got a 5 node setup here. My server "home" is the primary server that
>> all other servers connect to. The configs on all the servers look like this:
>>
>> # cat /etc/tinc/home/hosts/node1
>> Subnet  = 10.2.0.0/16
>> Address = 192.168.2.1
>>
>> <RSA KEY>
>>
>> # cat /etc/tinc/home/hosts/node2
>> Subnet  = 10.3.0.0/16
>> Address = 192.168.3.1
>>
>> <RSA KEY>
>>
>> Etc. All the hosts are setup the same.
>>
>> # /sbin/tinc -n home dump subnets
>> 10.1.0.0/16 owner home
>> 10.2.0.0/16 owner node1
>> 10.3.0.0/16 owner node2
>> 10.4.0.0/16 owner node3
>> 10.5.0.0/16 owner node4
>>
>> # cat /etc/tinc/home/tinc-up
>> ifconfig $INTERFACE 10.2.0.10 netmask 255.0.0.0
>> ifconfig $INTERFACE up
>>
>> # cat tinc.conf
>> Name = node1
>> ConnectTo = home
>> Mode = router
>> AddressFamily = ipv4
>> PingInterval = 600
>> PingTimeout = 15
>>
>> 4 out of 5 nodes work just fine. Node 2 however has issues. It does work
>> fine for 5-30m and then pauses my connection to it. It's still up. I can't
>> ping it over the "pause time" with 0% packet loss. Any TCP connection over
>> the link just pauses for a while. The odd thing is it doesn't timeout. In
>> an SSH session to the box over the tinc link I'll type "ps -ef" and 10m
>> later I'll get the response. SSH should timeout way before then so I'm not
>> sure what's going on. It's not like that all the time. I get maybe 15-30m
>> when it's working just fine and then 10m of network pause. While my SSH
>> session is paused I can see that the app on the server is talking to my
>> primary node over the tunnel. That seems odd.
>>
>> The app on the node side seems happy and can reach everything it needs
>> to. No sign of issue there. It only seems to be an issue over the tinc
>> tunnel. It kind of feels like maybe something is routing the IP space in a
>> different direction for a period of time and then it comes back. If that
>> were the case my TCP ssh connection would timeout well before the
>> connection returns to life.
>>
>> Has anyone seen anything like this? I've poked at a bunch of things to
>> try and pinpoint the issue. So far no love.
>>
>> The routing table looks fine and the same on all of them:
>>
>> Kernel IP routing table
>> Destination     Gateway         Genmask         Flags Metric Ref    Use
>> Iface
>> 0.0.0.0         192.168.3.1     0.0.0.0         UG    0      0        0
>> eth0
>> 10.0.0.0        0.0.0.0         255.0.0.0       U     0      0        0
>> home
>> 192.168.3.0     0.0.0.0         255.255.255.0   U     0      0        0
>> eth0
>>
>> Nothing else in node2's area uses 10. space.
>>
>> Any ideas I would appreciate it.
>>
>> Thanks,
>>
>> -Matt
>> _______________________________________________
>> tinc mailing list
>> tinc at tinc-vpn.org
>> http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
>>
>
> _______________________________________________
> tinc mailing list
> tinc at tinc-vpn.org
> http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
>
>
>
> _______________________________________________
> tinc mailing list
> tinc at tinc-vpn.org
> http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tinc-vpn.org/pipermail/tinc/attachments/20140125/e289ee43/attachment.html>