won't try to connect to other daemons at all,
and will instead just listen for incoming connections.
-.It Va DecrementTTL Li = yes | no Po no Pc
+.It Va DecrementTTL Li = yes | no Po no Pc Bq experimental
When enabled,
.Nm tinc
will decrement the Time To Live field in IPv4 packets, or the Hop Limit field in IPv6 packets,
When combined with the IndirectData option,
packets for nodes for which we do not have a meta connection with are also dropped.
+.It Va ECDSAPrivateKeyFile Li = Ar filename Po Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /ecdsa_key.priv Pc
+The file in which the private ECDSA key of this tinc daemon resides.
+This is only used if
+.Va ExperimentalProtocol
+is enabled.
+
+.It Va ExperimentalProtocol Li = yes | no Po no Pc Bq experimental
+When this option is enabled, experimental protocol enhancements will be used.
+Ephemeral ECDH will be used for key exchanges,
+and ECDSA will be used instead of RSA for authentication.
+When enabled, an ECDSA key must have been generated before with
+.Nm tincctl generate-ecdsa-keys .
+The experimental protocol may change at any time,
+and there is no guarantee that tinc will run stable when it is used.
+
.It Va Forwarding Li = off | internal | kernel Po internal Pc Bq experimental
This option selects the way indirect packets are forwarded.
.Bl -tag -width indent
Subnets can either be single MAC, IPv4 or IPv6 addresses,
in which case a subnet consisting of only that single address is assumed,
or they can be a IPv4 or IPv6 network address with a prefixlength.
-Shorthand notations are not supported.
For example, IPv4 subnets must be in a form like 192.168.1.0/24,
where 192.168.1.0 is the network address and 24 is the number of bits set in the netmask.
Note that subnets like 192.168.1.1/24 are invalid!
Read a networking HOWTO/FAQ/guide if you don't understand this.
-IPv6 subnets are notated like fec0:0:0:1:0:0:0:0/64.
+IPv6 subnets are notated like fec0:0:0:1::/64.
MAC addresses are notated like 0:1a:2b:3c:4d:5e.
.Pp