From: Guus Sliepen Date: Sat, 13 Jan 2001 14:38:18 +0000 (+0000) Subject: Added sample configuration directory. X-Git-Tag: release-1.0pre4~62 X-Git-Url: https://tinc-vpn.org/git/browse?a=commitdiff_plain;h=b195e8815f0abb2c5527119221886b524d719019;p=tinc Added sample configuration directory. --- diff --git a/doc/sample-config/hosts/alpha b/doc/sample-config/hosts/alpha new file mode 100644 index 00000000..95315e1f --- /dev/null +++ b/doc/sample-config/hosts/alpha @@ -0,0 +1,13 @@ +# Sample host configuration file + +# The real IP address of this tinc host. Can be used by other tinc hosts. +Address = 123.234.35.67 + +# Portnumber for incoming connections. Default is 655. +Port = 655 + +# Subnet on the virtual private network that is local for this host. +Subnet = 192.168.1.0/24 + +# The file in which the public key for this host is stored. Required. +PublicKeyFile = /etc/tinc/example/hosts/alpha.key diff --git a/doc/sample-config/hosts/alpha.key b/doc/sample-config/hosts/alpha.key new file mode 100644 index 00000000..ac135363 --- /dev/null +++ b/doc/sample-config/hosts/alpha.key @@ -0,0 +1 @@ +# Generate this file with `tincd -n example -K` diff --git a/doc/sample-config/hosts/beta b/doc/sample-config/hosts/beta new file mode 100644 index 00000000..9e357b22 --- /dev/null +++ b/doc/sample-config/hosts/beta @@ -0,0 +1,14 @@ +# Sample host configuration file +# This file was generated by host beta. + +# The real IP address of this tinc host. Can be used by other tinc hosts. +Address = 123.45.67.189 + +# Portnumber for incoming connections. Default is 655. +Port = 6500 + +# Subnet on the virtual private network that is local for this host. +Subnet = 192.168.2.0/24 + +# The file in which the public key for this host is stored. Required. +PublicKeyFile = /etc/tinc/example/hosts/beta.key diff --git a/doc/sample-config/hosts/beta.key b/doc/sample-config/hosts/beta.key new file mode 100644 index 00000000..4470b704 --- /dev/null +++ b/doc/sample-config/hosts/beta.key @@ -0,0 +1 @@ +# This file has not been generated by this host, but by beta. diff --git a/doc/sample-config/rsa_key.priv b/doc/sample-config/rsa_key.priv new file mode 100644 index 00000000..ac135363 --- /dev/null +++ b/doc/sample-config/rsa_key.priv @@ -0,0 +1 @@ +# Generate this file with `tincd -n example -K` diff --git a/doc/sample-config/tinc-down b/doc/sample-config/tinc-down new file mode 100644 index 00000000..9f3b499d --- /dev/null +++ b/doc/sample-config/tinc-down @@ -0,0 +1,7 @@ +#!/bin/sh +# This file closes down the tap device. +# Note that if you use the universal tun/tap driver, you don't +# need to do anything; once tinc quits the tap device is already +# removed by the kernel. + +ifconfig tap0 down diff --git a/doc/sample-config/tinc-up b/doc/sample-config/tinc-up new file mode 100644 index 00000000..98df7638 --- /dev/null +++ b/doc/sample-config/tinc-up @@ -0,0 +1,14 @@ +#!/bin/sh +# This file sets up the tap device. +# It gives you the freedom to do anything you want with it. +# Use the correct name for the tap device: +# For ethertap this is tap0, tap1, tap2 etcetera, +# but for the universal tun/tap device use $NETNAME. + +# Set hardware ethernet address (required!) +ifconfig tap0 hw ether fe:fd:0:0:0:0 + +# Give it the right ip and netmask. Remember, the subnet of the +# tap device must be larger than that of the individual Subnets +# as defined in the host configuration file! +ifconfig tap0 192.168.1.1 netmask 255.255.0.0 -arp diff --git a/doc/sample-config/tinc.conf b/doc/sample-config/tinc.conf new file mode 100644 index 00000000..ea5216ea --- /dev/null +++ b/doc/sample-config/tinc.conf @@ -0,0 +1,23 @@ +# Sample tinc configuration file + +# This is a comment. +# Spaces and tabs are eliminated. +# The = sign isn't strictly necessary any longer, though you may want +# to leave it in as it improves readability :) +# Variable names are treated case insensitive. + +# The name of this tinc host. Required. +Name = alpha + +# The internet host to connect with. +# Comment these out to make yourself a listen-only connection +# You must use the name of another tinc host. +# May be used multiple times for redundance. +ConnectTo = beta + +# The tap device tinc will use. Required. +# Default is /dev/tap0 +TapDevice = /dev/tap1 + +# The file in which the private key for this host is stored. Required. +PrivateKeyFile = /etc/tinc/example/rsa_key.priv diff --git a/doc/tinc.conf.sample b/doc/tinc.conf.sample deleted file mode 100644 index bbccc440..00000000 --- a/doc/tinc.conf.sample +++ /dev/null @@ -1,46 +0,0 @@ -# Sample tinc configuration file - -# This is a comment. -# Spaces and tabs are eliminated. -# The = sign isn't strictly necessary any longer, though you may want -# to leave it in as it improves readability :) -# Variable names are treated case insensitive. - -# The internet host to connect with -# comment these out to make yourself a listen-only connection -# You may use an IP address or its FQDN. -ConnectTo = 1.2.3.4 - -# Connect to which port of the `ConnectTo' host - -# It is advised that you only connect to ports that are < 1024, -# because some malicious (non-root) user may run a fake tincd on ports -# above 1024. -# The default port is 655, the port that has been assigned to tinc -# by the IANA. If you want tincd to listen on any other port than 655, -# you can use ListenPort for the `server', and ConnectPort for the -# `client'. - -# You may use the prefixes 0x or 0 to denote a hexadecimal or octal -# number respectively. -ConnectPort = 0x300 - -# Listen on which port -ListenPort = 200 - -# My own VPN IP -# You may use the /nn notation to indicate the number of bits used for -# the mask, /8 is equivalent to the netmask 255.0.0.0 (the first 8 -# bits are set to 1). -MyOwnVPNIP = 10.x.x.x/8 - -# VPN Netmask -# You'll need this option if you use the Debian or Redhat init -# scripts. Put in here a netmask that covers your entire VPN network; -# it is used to set routes from the init script, tinc itself ignores -# it. -VpnMask = 255.255.0.0 - -# Which local file? -# Default is /dev/tap0 -TapDevice = /dev/tap1