Support :: in IPv6 Subnets.
[tinc] / doc / tinc.conf.5.in
index fa62153..f6b0da4 100644 (file)
@@ -180,7 +180,7 @@ If you don't specify a host with
 won't try to connect to other daemons at all,
 and will instead just listen for incoming connections.
 
 won't try to connect to other daemons at all,
 and will instead just listen for incoming connections.
 
-.It Va DecrementTTL Li = yes | no Po no Pc
+.It Va DecrementTTL Li = yes | no Po no Pc Bq experimental
 When enabled,
 .Nm tinc
 will decrement the Time To Live field in IPv4 packets, or the Hop Limit field in IPv6 packets,
 When enabled,
 .Nm tinc
 will decrement the Time To Live field in IPv4 packets, or the Hop Limit field in IPv6 packets,
@@ -564,12 +564,11 @@ variables can be specified.
 Subnets can either be single MAC, IPv4 or IPv6 addresses,
 in which case a subnet consisting of only that single address is assumed,
 or they can be a IPv4 or IPv6 network address with a prefixlength.
 Subnets can either be single MAC, IPv4 or IPv6 addresses,
 in which case a subnet consisting of only that single address is assumed,
 or they can be a IPv4 or IPv6 network address with a prefixlength.
-Shorthand notations are not supported.
 For example, IPv4 subnets must be in a form like 192.168.1.0/24,
 where 192.168.1.0 is the network address and 24 is the number of bits set in the netmask.
 Note that subnets like 192.168.1.1/24 are invalid!
 Read a networking HOWTO/FAQ/guide if you don't understand this.
 For example, IPv4 subnets must be in a form like 192.168.1.0/24,
 where 192.168.1.0 is the network address and 24 is the number of bits set in the netmask.
 Note that subnets like 192.168.1.1/24 are invalid!
 Read a networking HOWTO/FAQ/guide if you don't understand this.
-IPv6 subnets are notated like fec0:0:0:1:0:0:0:0/64.
+IPv6 subnets are notated like fec0:0:0:1::/64.
 MAC addresses are notated like 0:1a:2b:3c:4d:5e.
 
 .Pp
 MAC addresses are notated like 0:1a:2b:3c:4d:5e.
 
 .Pp