@subsection Configuration of Darwin (MacOS/X) kernels
Tinc on Darwin relies on a tunnel driver for its data acquisition from the kernel.
-Tinc supports either the driver from @uref{http://tuntaposx.sourceforge.net/},
+OS X version 10.6.8 and later have a built-in tun driver called "utun".
+Tinc also supports the driver from @uref{http://tuntaposx.sourceforge.net/},
which supports both tun and tap style devices,
-and also the driver from from @uref{http://chrisp.de/en/projects/tunnel.html}.
-The former driver is recommended.
-The tunnel driver must be loaded before starting tinc with the following command:
-@example
-kmodload tunnel
-@end example
+By default, tinc expects the tuntaposx driver to be installed.
+To use the utun driver, set add @code{Device = utunX} to @file{tinc.conf},
+where X is the desired number for the utun interface.
+You can also omit the number, in which case the first free number will be chosen.
@c ==================================================================
@cindex requirements
@cindex libraries
-Before you can configure or build tinc, you need to have the OpenSSL, zlib,
+Before you can configure or build tinc, you need to have the LibreSSL or OpenSSL, zlib,
lzo, curses and readline libraries installed on your system. If you try to
configure tinc without having them installed, configure will give you an error
message, and stop.
@menu
-* OpenSSL::
+* LibreSSL/OpenSSL::
* zlib::
* lzo::
* libcurses::
@c ==================================================================
-@node OpenSSL
-@subsection OpenSSL
+@node LibreSSL/OpenSSL
+@subsection LibreSSL/OpenSSL
+@cindex LibreSSL
@cindex OpenSSL
For all cryptography-related functions, tinc uses the functions provided
-by the OpenSSL library.
+by the LibreSSL or the OpenSSL library.
If this library is not installed, you wil get an error when configuring
tinc for build. Support for running tinc with other cryptographic libraries
available. Make sure you install the development AND runtime versions
of this package.
-If you have to install OpenSSL manually, you can get the source code
-from @url{http://www.openssl.org/}. Instructions on how to configure,
-build and install this package are included within the package. Please
-make sure you build development and runtime libraries (which is the
+If your operating system comes neither with LibreSSL or OpenSSL, you have to
+install one manually. It is recommended that you get the latest version of
+LibreSSL from @url{http://www.libressl.org/}. Instructions on how to
+configure, build and install this package are included within the package.
+Please make sure you build development and runtime libraries (which is the
default).
-If you installed the OpenSSL libraries from source, it may be necessary
+If you installed the LibreSSL or OpenSSL libraries from source, it may be necessary
to let configure know where they are, by passing configure one of the
---with-openssl-* parameters.
+--with-openssl-* parameters. Note that you even have to use --with-openssl-* if you
+are using LibreSSL.
@example
---with-openssl=DIR OpenSSL library and headers prefix
---with-openssl-include=DIR OpenSSL headers directory
+--with-openssl=DIR LibreSSL/OpenSSL library and headers prefix
+--with-openssl-include=DIR LibreSSL/OpenSSL headers directory
(Default is OPENSSL_DIR/include)
---with-openssl-lib=DIR OpenSSL library directory
+--with-openssl-lib=DIR LibreSSL/OpenSSL library directory
(Default is OPENSSL_DIR/lib)
@end example
followed by an IP header.
This mode should support both IPv4 and IPv6 packets.
+@cindex utun
+@item utun (OS X)
+Set type to utun.
+This is only supported on OS X version 10.6.8 and higher, but doesn't require the tuntaposx module.
+This mode should support both IPv4 and IPv6 packets.
+
@item tap (BSD and Linux)
Set type to tap.
Tinc will expect packets read from the virtual network device
@cindex Name
@item Name = <@var{name}> [required]
This is a symbolic name for this connection.
-The name should consist only of alfanumeric and underscore characters (a-z, A-Z, 0-9 and _), and is case sensitive.
+The name must consist only of alfanumeric and underscore characters (a-z, A-Z, 0-9 and _), and is case sensitive.
If Name starts with a $, then the contents of the environment variable that follows will be used.
In that case, invalid characters will be converted to underscores.
@cindex Cipher
@item Cipher = <@var{cipher}> (blowfish)
The symmetric cipher algorithm used to encrypt UDP packets using the legacy protocol.
-Any cipher supported by OpenSSL is recognized.
+Any cipher supported by LibreSSL or OpenSSL is recognized.
Furthermore, specifying "none" will turn off packet encryption.
It is best to use only those ciphers which support CBC mode.
This option has no effect for connections using the SPTPS protocol, which always use AES-256-CTR.
@cindex Digest
@item Digest = <@var{digest}> (sha1)
The digest algorithm used to authenticate UDP packets using the legacy protocol.
-Any digest supported by OpenSSL is recognized.
+Any digest supported by LibreSSL or OpenSSL is recognized.
Furthermore, specifying "none" will turn off packet authentication.
This option has no effect for connections using the SPTPS protocol, which always use HMAC-SHA-256.
@cindex scripts
Apart from reading the server and host configuration files,
tinc can also run scripts at certain moments.
+Below is a list of filenames of scripts and a description of when they are run.
+A script is only run if it exists and if it is executable.
+
+Scripts are run synchronously;
+this means that tinc will temporarily stop processing packets until the called script finishes executing.
+This guarantees that scripts will execute in the exact same order as the events that trigger them.
+If you need to run commands asynchronously, you have to ensure yourself that they are being run in the background.
+
Under Windows (not Cygwin), the scripts should have the extension @file{.bat} or @file{.cmd}.
@table @file
started and has connected to the virtual network device.
It should be used to set up the corresponding network interface,
but can also be used to start other things.
+
Under Windows you can use the Network Connections control panel instead of creating this script.
@cindex tinc-down
Most problems must be corrected by the user itself, however in some cases (like file permissions and missing public keys),
tinc will ask if it should fix the problem.
+@cindex sign
+@item sign [@var{filename}]
+Sign a file with the local node's private key.
+If no @var{filename} is given, the file is read from standard input.
+The signed file is written to standard output.
+
+@cindex verify
+@item verify @var{name} [@var{filename}]
+
+Check the signature of a file against a node's public key.
+The @var{name} of the node must be given,
+or can be "." to check against the local node's public key,
+or "*" to allow a signature from any node whose public key is known.
+If no @var{filename} is given, the file is read from standard input.
+If the verification is succesful, a copy of the input with the signature removed is written to standard output, and the exit code will be zero.
+If the verification failed, nothing will be written to standard output, and the exit code will be non-zero.
+
@end table
@c ==================================================================
packets they can intercept. The encryption algorithm and message authentication
algorithm can be changed in the configuration. The length of the message
authentication codes is also adjustable. The length of the key for the
-encryption algorithm is always the default length used by OpenSSL.
+encryption algorithm is always the default length used by LibreSSL/OpenSSL.
The SPTPS protocol is described in @ref{Simple Peer-to-Peer Security}.
For comparison, this is how SPTPS UDP packets look:
In August 2000, we discovered the existence of a security hole in all versions
of tinc up to and including 1.0pre2. This had to do with the way we exchanged
keys. Since then, we have been working on a new authentication scheme to make
-tinc as secure as possible. The current version uses the OpenSSL library and
+tinc as secure as possible. The current version uses the LibreSSL or OpenSSL library and
uses strong authentication with RSA keys.
On the 29th of December 2001, Jerome Etienne posted a security analysis of tinc
projects / tinc / blobdiff