tinc-gui: Reformat codebase according to PEP8

[tinc] / doc / tinc.texi

diff --git a/doc/tinc.texi b/doc/tinc.texi
index 3fe27b6..e939784 100644 (file)
--- a/doc/tinc.texi
+++ b/doc/tinc.texi
@@ -15,7 +15,7 @@
 
 This is the info manual for @value{PACKAGE} version @value{VERSION}, a Virtual Private Network daemon.
 
-Copyright @copyright{} 1998-2014 Ivo Timmermans,
+Copyright @copyright{} 1998-2015 Ivo Timmermans,
 Guus Sliepen <guus@@tinc-vpn.org> and
 Wessel Dankers <wsl@@tinc-vpn.org>.
 
@@ -43,7 +43,7 @@ permission notice identical to this one.
 @vskip 0pt plus 1filll
 This is the info manual for @value{PACKAGE} version @value{VERSION}, a Virtual Private Network daemon.
 
-Copyright @copyright{} 1998-2014 Ivo Timmermans,
+Copyright @copyright{} 1998-2015 Ivo Timmermans,
 Guus Sliepen <guus@@tinc-vpn.org> and
 Wessel Dankers <wsl@@tinc-vpn.org>.
 
@@ -735,7 +735,7 @@ You will also notice that log messages it appears in syslog as coming from @file
 and on Linux, unless specified otherwise, the name of the virtual network interface will be the same as the network name.
 
 However, it is not strictly necessary that you call tinc with the -n
-option. If you don not use it, the network name will just be empty, and
+option. If you do not use it, the network name will just be empty, and
 tinc will look for files in @file{@value{sysconfdir}/tinc/} instead of
 @file{@value{sysconfdir}/tinc/@var{netname}/};
 the configuration file will then be @file{@value{sysconfdir}/tinc/tinc.conf},
@@ -1207,10 +1207,10 @@ The environment variables @env{NAME}, @env{NODE}, @env{REMOTEADDRES} and @env{RE
 @end table
 
 @cindex ReplayWindow
-@item ReplayWindow = <bytes> (16)
+@item ReplayWindow = <bytes> (32)
 This is the size of the replay tracking window for each remote node, in bytes.
 The window is a bitfield which tracks 1 packet per bit, so for example
-the default setting of 16 will track up to 128 packets in the window. In high
+the default setting of 32 will track up to 256 packets in the window. In high
 bandwidth scenarios, setting this to a higher value can reduce packet loss from
 the interaction of replay tracking with underlying real packet loss and/or
 reordering. Setting this to zero will disable replay tracking completely and
@@ -1258,14 +1258,16 @@ it will assume UDP communication is broken and will fall back to TCP.
 The minimum amount of time between sending periodic updates about UDP addresses, which are mostly useful for UDP hole punching.
 
 @cindex UDPRcvBuf
-@item UDPRcvBuf = <bytes> (OS default)
+@item UDPRcvBuf = <bytes> (1048576)
 Sets the socket receive buffer size for the UDP socket, in bytes.
-If unset, the default buffer size will be used by the operating system.
+If set to zero, the default buffer size will be used by the operating system.
+Note: this setting can have a significant impact on performance, especially raw throughput.
 
 @cindex UDPSndBuf
-@item UDPSndBuf = <bytes> Pq OS default
+@item UDPSndBuf = <bytes> (1048576)
 Sets the socket send buffer size for the UDP socket, in bytes.
-If unset, the default buffer size will be used by the operating system.
+If set to zero, the default buffer size will be used by the operating system.
+Note: this setting can have a significant impact on performance, especially raw throughput.
 
 @end table
 
@@ -2406,6 +2408,10 @@ Nodes are colored according to their reachability:
 red nodes are unreachable, orange nodes are indirectly reachable, green nodes are directly reachable.
 Black nodes are either directly or indirectly reachable, but direct reachability has not been tried yet.
 
+@item dump invitations
+Dump a list of outstanding invitations.
+The filename of the invitation, as well as the name of the node that is being invited is shown for each invitation.
+
 @cindex info
 @item info @var{node} | @var{subnet} | @var{address}
 Show information about a particular @var{node}, @var{subnet} or @var{address}.