Allow dumping a list of outstanding invitations.

[tinc] / doc / tinc.texi

diff --git a/doc/tinc.texi b/doc/tinc.texi
index 581da6e..f386b83 100644 (file)
--- a/doc/tinc.texi
+++ b/doc/tinc.texi
@@ -1207,10 +1207,10 @@ The environment variables @env{NAME}, @env{NODE}, @env{REMOTEADDRES} and @env{RE
 @end table
 
 @cindex ReplayWindow
-@item ReplayWindow = <bytes> (16)
+@item ReplayWindow = <bytes> (32)
 This is the size of the replay tracking window for each remote node, in bytes.
 The window is a bitfield which tracks 1 packet per bit, so for example
-the default setting of 16 will track up to 128 packets in the window. In high
+the default setting of 32 will track up to 256 packets in the window. In high
 bandwidth scenarios, setting this to a higher value can reduce packet loss from
 the interaction of replay tracking with underlying real packet loss and/or
 reordering. Setting this to zero will disable replay tracking completely and
@@ -1253,15 +1253,21 @@ The minimum amount of time between sending UDP ping datagrams to try to establis
 If tinc doesn't receive any UDP ping replies over the specified interval,
 it will assume UDP communication is broken and will fall back to TCP.
 
+@cindex UDPInfoInterval
+@item UDPInfoInterval = <seconds> (5)
+The minimum amount of time between sending periodic updates about UDP addresses, which are mostly useful for UDP hole punching.
+
 @cindex UDPRcvBuf
-@item UDPRcvBuf = <bytes> (OS default)
+@item UDPRcvBuf = <bytes> (1048576)
 Sets the socket receive buffer size for the UDP socket, in bytes.
-If unset, the default buffer size will be used by the operating system.
+If set to zero, the default buffer size will be used by the operating system.
+Note: this setting can have a significant impact on performance, especially raw throughput.
 
 @cindex UDPSndBuf
-@item UDPSndBuf = <bytes> Pq OS default
+@item UDPSndBuf = <bytes> (1048576)
 Sets the socket send buffer size for the UDP socket, in bytes.
-If unset, the default buffer size will be used by the operating system.
+If set to zero, the default buffer size will be used by the operating system.
+Note: this setting can have a significant impact on performance, especially raw throughput.
 
 @end table
 
@@ -1329,6 +1335,10 @@ This option controls the initial path MTU to this node.
 When this option is enabled, tinc will try to discover the path MTU to this node.
 After the path MTU has been discovered, it will be enforced on the VPN.
 
+@cindex MTUInfoInterval
+@item MTUInfoInterval = <seconds> (5)
+The minimum amount of time between sending periodic updates about relay path MTU. Useful for quickly determining MTU to indirect nodes.
+
 @cindex Port
 @item Port = <@var{port}> (655)
 This is the port this tinc daemon listens on.
@@ -2398,6 +2408,10 @@ Nodes are colored according to their reachability:
 red nodes are unreachable, orange nodes are indirectly reachable, green nodes are directly reachable.
 Black nodes are either directly or indirectly reachable, but direct reachability has not been tried yet.
 
+@item dump invitations
+Dump a list of outstanding invitations.
+The filename of the invitation, as well as the name of the node that is being invited is shown for each invitation.
+
 @cindex info
 @item info @var{node} | @var{subnet} | @var{address}
 Show information about a particular @var{node}, @var{subnet} or @var{address}.