@subsection Configuration of Darwin (MacOS/X) kernels
Tinc on Darwin relies on a tunnel driver for its data acquisition from the kernel.
-Tinc supports either the driver from @uref{http://tuntaposx.sourceforge.net/},
+OS X version 10.6.8 and later have a built-in tun driver called "utun".
+Tinc also supports the driver from @uref{http://tuntaposx.sourceforge.net/},
which supports both tun and tap style devices,
-and also the driver from from @uref{http://chrisp.de/en/projects/tunnel.html}.
-The former driver is recommended.
-The tunnel driver must be loaded before starting tinc with the following command:
-@example
-kmodload tunnel
-@end example
+By default, tinc expects the tuntaposx driver to be installed.
+To use the utun driver, set add @code{Device = utunX} to @file{tinc.conf},
+where X is the desired number for the utun interface.
+You can also omit the number, in which case the first free number will be chosen.
@c ==================================================================
and on Linux, unless specified otherwise, the name of the virtual network interface will be the same as the network name.
However, it is not strictly necessary that you call tinc with the -n
-option. If you don not use it, the network name will just be empty, and
+option. If you do not use it, the network name will just be empty, and
tinc will look for files in @file{@value{sysconfdir}/tinc/} instead of
@file{@value{sysconfdir}/tinc/@var{netname}/};
the configuration file will then be @file{@value{sysconfdir}/tinc/tinc.conf},
followed by an IP header.
This mode should support both IPv4 and IPv6 packets.
+@cindex utun
+@item utun (OS X)
+Set type to utun.
+This is only supported on OS X version 10.6.8 and higher, but doesn't require the tuntaposx module.
+This mode should support both IPv4 and IPv6 packets.
+
@item tap (BSD and Linux)
Set type to tap.
Tinc will expect packets read from the virtual network device
@cindex Name
@item Name = <@var{name}> [required]
This is a symbolic name for this connection.
-The name should consist only of alfanumeric and underscore characters (a-z, A-Z, 0-9 and _), and is case sensitive.
+The name must consist only of alfanumeric and underscore characters (a-z, A-Z, 0-9 and _), and is case sensitive.
If Name starts with a $, then the contents of the environment variable that follows will be used.
In that case, invalid characters will be converted to underscores.
If set to zero, the default buffer size will be used by the operating system.
Note: this setting can have a significant impact on performance, especially raw throughput.
+@cindex UPnP
+@item UPnP = <yes|udponly|no> (no)
+If this option is enabled then tinc will search for UPnP-IGD devices on the local network.
+It will then create and maintain port mappings for tinc's listening TCP and UDP ports.
+If set to "udponly", tinc will only create a mapping for its UDP (data) port, not for its TCP (metaconnection) port.
+Note that tinc must have been built with miniupnpc support for this feature to be available.
+Furthermore, be advised that enabling this can have security implications, because the miniupnpc library that
+tinc uses might not be well-hardened with regard to malicious UPnP replies.
+
+@cindex UPnPDiscoverWait
+@item UPnPDiscoverWait = <seconds> (5)
+The amount of time to wait for replies when probing the local network for UPnP devices.
+
+@cindex UPnPRefreshPeriod
+@item UPnPRefreshPeriod = <seconds> (5)
+How often tinc will re-add the port mapping, in case it gets reset on the UPnP device.
+This also controls the duration of the port mapping itself, which will be set to twice that duration.
+
@end table
@cindex scripts
Apart from reading the server and host configuration files,
tinc can also run scripts at certain moments.
+Below is a list of filenames of scripts and a description of when they are run.
+A script is only run if it exists and if it is executable.
+
+Scripts are run synchronously;
+this means that tinc will temporarily stop processing packets until the called script finishes executing.
+This guarantees that scripts will execute in the exact same order as the events that trigger them.
+If you need to run commands asynchronously, you have to ensure yourself that they are being run in the background.
+
Under Windows (not Cygwin), the scripts should have the extension @file{.bat} or @file{.cmd}.
@table @file
started and has connected to the virtual network device.
It should be used to set up the corresponding network interface,
but can also be used to start other things.
+
Under Windows you can use the Network Connections control panel instead of creating this script.
@cindex tinc-down
Most problems must be corrected by the user itself, however in some cases (like file permissions and missing public keys),
tinc will ask if it should fix the problem.
+@cindex sign
+@item sign [@var{filename}]
+Sign a file with the local node's private key.
+If no @var{filename} is given, the file is read from standard input.
+The signed file is written to standard output.
+
+@cindex verify
+@item verify @var{name} [@var{filename}]
+
+Check the signature of a file against a node's public key.
+The @var{name} of the node must be given,
+or can be "." to check against the local node's public key,
+or "*" to allow a signature from any node whose public key is known.
+If no @var{filename} is given, the file is read from standard input.
+If the verification is succesful, a copy of the input with the signature removed is written to standard output, and the exit code will be zero.
+If the verification failed, nothing will be written to standard output, and the exit code will be non-zero.
+
@end table
@c ==================================================================
projects / tinc / blobdiff