From: Guus Sliepen Date: Sun, 24 Jun 2018 14:19:10 +0000 (+0200) Subject: Enable AutoConnect by default. X-Git-Tag: release-1.1pre17~11 X-Git-Url: https://tinc-vpn.org/git/browse?p=tinc;a=commitdiff_plain;h=01cb1961eac33de9e9d9cecd0910850a2cb549c3 Enable AutoConnect by default. --- diff --git a/doc/tinc.conf.5.in b/doc/tinc.conf.5.in index fa0f2fd0..6897ba6e 100644 --- a/doc/tinc.conf.5.in +++ b/doc/tinc.conf.5.in @@ -114,7 +114,7 @@ If .Qq any is selected, then depending on the operating system both IPv4 and IPv6 or just IPv6 listening sockets will be created. -.It Va AutoConnect Li = yes | no Po no Pc Bq experimental +.It Va AutoConnect Li = yes | no Po yes If set to yes, .Nm tinc will automatically set up meta connections to other nodes, @@ -177,7 +177,7 @@ line). .Pp If you don't specify a host with .Va ConnectTo -and don't enable +and have disabled .Va AutoConnect , .Nm tinc won't try to connect to other daemons at all, diff --git a/doc/tinc.texi b/doc/tinc.texi index 4e30afe0..cca61c2e 100644 --- a/doc/tinc.texi +++ b/doc/tinc.texi @@ -744,22 +744,15 @@ and the host configuration files are expected to be in @file{@value{sysconfdir}/ When tinc starts up, it parses the command-line options and then reads in the configuration file tinc.conf. -If it sees one or more `ConnectTo' values pointing to other tinc daemons in that file, -it will try to connect to those other daemons. -Whether this succeeds or not and whether `ConnectTo' is specified or not, -tinc will listen for incoming connection from other deamons. -If you did specify a `ConnectTo' value and the other side is not responding, -tinc will keep retrying. -This means that once started, tinc will stay running until you tell it to stop, -and failures to connect to other tinc daemons will not stop your tinc daemon -for trying again later. -This means you don't have to intervene if there are temporary network problems. +It will then start listening for incoming connection from other deamons, +and will by default also automatically try to connect to known peers. +By default, tinc will try to keep at least 3 working meta-connections alive at all times. @cindex client @cindex server There is no real distinction between a server and a client in tinc. -If you wish, you can view a tinc daemon without a `ConnectTo' value as a server, -and one which does specify such a value as a client. +If you wish, you can view a tinc daemon without a `ConnectTo' statement in tinc.conf and `AutoConnect = no' as a server, +and one which does have one or more `ConnectTo' statements or `Autoconnect = yes' (which is the defualt) as a client. It does not matter if two tinc daemons have a `ConnectTo' value pointing to each other however. Connections specified using `ConnectTo' are so-called meta-connections. @@ -839,7 +832,7 @@ If any is selected, then depending on the operating system both IPv4 and IPv6 or just IPv6 listening sockets will be created. @cindex AutoConnect -@item AutoConnect = (no) [experimental] +@item AutoConnect = (yes) If set to yes, tinc will automatically set up meta connections to other nodes, without requiring @var{ConnectTo} variables. @@ -900,7 +893,7 @@ in which case outgoing connections to each specified tinc daemon are made. The names should be known to this tinc daemon (i.e., there should be a host configuration file for the name on the ConnectTo line). -If you don't specify a host with ConnectTo and don't enable AutoConnect, +If you don't specify a host with ConnectTo and have disabled AutoConnect, tinc won't try to connect to other daemons at all, and will instead just listen for incoming connections. @@ -1634,23 +1627,11 @@ For example, if your hostname is foo.example.org, run: tinc -n @var{netname} add address foo.example.org @end example -If you already know to which daemons your daemon should make meta-connections, -you should configure that now as well. -Suppose you want to connect to a daemon named "bar", run: - -@example -tinc -n @var{netname} add connectto bar -@end example - -Note that you specify the Name of the other daemon here, not an IP address or hostname! -When you start tinc, and it tries to make a connection to "bar", -it will look for a host configuration file named @file{hosts/bar}, -and will read Address statements and public keys from that file. - @subsubheading Step 2. Exchanging configuration files. -If your daemon has a ConnectTo = bar statement in its @file{tinc.conf} file, -or if bar has a ConnectTo your daemon, then you both need each other's host configuration files. +In order for two tinc daemons to be able to connect to each other, +they each need the other's host configuration files. +So if you want foo to be able to connect with bar, You should send @file{hosts/@var{name}} to bar, and bar should send you his file which you should move to @file{hosts/bar}. If you are on a UNIX platform, you can easily send an email containing the necessary information using the following command (assuming the owner of bar has the email address bar@@example.org): @@ -1676,10 +1657,9 @@ tinc -n @var{netname} export \ | tinc -n @var{netname} import @end example -You should repeat this for all nodes you ConnectTo, or which ConnectTo you. -However, remember that you do not need to ConnectTo all nodes in the VPN; -it is only necessary to create one or a few meta-connections, -after the connections are made tinc will learn about all the other nodes in the VPN, +You can repeat this for a few other nodes as well. +It is not necessary to manually exchange host config files between all nodes; +after the initial connections are made tinc will learn about all the other nodes in the VPN, and will automatically make other connections as necessary. @@ -1825,12 +1805,10 @@ and in @file{@value{sysconfdir}/tinc/company/tinc.conf}: @example Name = BranchB -ConnectTo = BranchA @end example Note here that the internal address (on eth0) doesn't have to be the -same as on the VPN interface. Also, ConnectTo is given so that this node will -always try to connect to BranchA. +same as on the VPN interface. On all hosts, in @file{@value{sysconfdir}/tinc/company/hosts/BranchB}: @@ -1861,7 +1839,6 @@ and in @file{@value{sysconfdir}/tinc/company/tinc.conf}: @example Name = BranchC -ConnectTo = BranchA @end example C already has another daemon that runs on port 655, so they have to @@ -1898,7 +1875,6 @@ and in @file{@value{sysconfdir}/tinc/company/tinc.conf}: @example Name = BranchD -ConnectTo = BranchC @end example D will be connecting to C, which has a tincd running for this network on @@ -2565,7 +2541,7 @@ Examples of changing the configuration using tinc: tinc -n vpn init foo tinc -n vpn add Subnet 192.168.1.0/24 tinc -n vpn add bar.Address bar.example.com -tinc -n vpn add ConnectTo bar +tinc -n vpn set Mode switch tinc -n vpn export | gpg --clearsign | mail -s "My config" vpnmaster@@example.com @end example diff --git a/src/net_setup.c b/src/net_setup.c index 455f66c6..73d46c99 100644 --- a/src/net_setup.c +++ b/src/net_setup.c @@ -687,15 +687,8 @@ bool setup_myself_reloadable(void) { keylifetime = 3600; } - config_t *cfg = lookup_config(config_tree, "AutoConnect"); - - if(cfg) { - if(!get_config_bool(cfg, &autoconnect)) { - // Some backwards compatibility with when this option was an int - int val = 0; - get_config_int(cfg, &val); - autoconnect = val; - } + if (!get_config_bool(lookup_config(config_tree, "AutoConnect"), &autoconnect)) { + autoconnect = true; } get_config_bool(lookup_config(config_tree, "DisableBuggyPeers"), &disablebuggypeers);