From fd3800324f4e4c67b087eaf5e0a61a184a270812 Mon Sep 17 00:00:00 2001 From: Guus Sliepen Date: Wed, 13 Apr 2016 15:34:16 +0200 Subject: [PATCH] Make text files Markdown-compatible. --- COPYING.README | 20 +- NEWS | 1309 +++++++++++++++++++++--------------------------- README | 27 +- README.android | 35 +- README.git | 10 +- THANKS | 5 +- 6 files changed, 606 insertions(+), 800 deletions(-) diff --git a/COPYING.README b/COPYING.README index 2eb9c1fa..166102b0 100644 --- a/COPYING.README +++ b/COPYING.README @@ -1,19 +1,17 @@ The following applies to tinc: -This program is released under the GPL with the additional exemption that -compiling, linking, and/or using OpenSSL is allowed. You may provide binary -packages linked to the OpenSSL libraries, provided that all other requirements -of the GPL are met. +> This program is released under the GPL with the additional exemption that +> compiling, linking, and/or using OpenSSL is allowed. You may provide binary +> packages linked to the OpenSSL libraries, provided that all other requirements +> of the GPL are met. The following applies to the LZO library: - Hereby I grant a special exception to the tinc VPN project - (http://tinc.nl.linux.org/) to link the LZO library with the OpenSSL library - (http://www.openssl.org). - - Markus F.X.J. Oberhumer +> Hereby I grant a special exception to the tinc VPN project +> (https://www.tinc-vpn.org/) to link the LZO library with the OpenSSL library +> (https://openssl.org). +> +> Markus F.X.J. Oberhumer When tinc is compiled with the --enable-tunemu option, the resulting binary falls under the GPL version 3 or later. - - diff --git a/NEWS b/NEWS index abd6a6fb..63295813 100644 --- a/NEWS +++ b/NEWS @@ -1,830 +1,639 @@ -Version 1.1pre11 December 27 2014 - - * Added a "network" command to list or switch networks. - - * Switched to Ed25519 keys and the ChaCha-Poly1305 cipher for the new protocol. - - * AutoConnect is now a boolean option, when enabled tinc always tries to keep - at least three meta-connections open. - - * The new protocol now uses UDP much more often. - - * Tinc "del" and "get" commands now return a non-zero exit code when they - don't find the requested variable. - - * Updated documentation. - - * Added a "DeviceStandby" option to defer running tinc-up until a working - connection is made, and which on Windows will also change the network - interface link status accordingly. - - * Tinc now tells the resolver to reload /etc/resolv.conf when it receives - SIGALRM. - - * Improved error messages and event loop handling on Windows. - - * LocalDiscovery now uses local address learned from other nodes, and is - enabled by default. - - * Added a "BroadcastSubnet" option to change the behavior of broadcast packets - in router mode. - - * Added support for dotted quad notation in IPv6 (e.g. ::1.2.3.4). - - * Improved format of printed Subnets, MAC and IPv6 addresses. - - * Added a "--batch" option to force the tinc CLI to run in non-interactive - mode. - - * Improve default Device selection on *BSD and Mac OS X. - - * Allow running tinc without RSA keys. +# Version 1.1pre11 December 27 2014 + +* Added a "network" command to list or switch networks. +* Switched to Ed25519 keys and the ChaCha-Poly1305 cipher for the new protocol. +* AutoConnect is now a boolean option, when enabled tinc always tries to keep + at least three meta-connections open. +* The new protocol now uses UDP much more often. +* Tinc "del" and "get" commands now return a non-zero exit code when they + don't find the requested variable. +* Updated documentation. +* Added a "DeviceStandby" option to defer running tinc-up until a working + connection is made, and which on Windows will also change the network + interface link status accordingly. +* Tinc now tells the resolver to reload /etc/resolv.conf when it receives + SIGALRM. +* Improved error messages and event loop handling on Windows. +* LocalDiscovery now uses local address learned from other nodes, and is + enabled by default. +* Added a "BroadcastSubnet" option to change the behavior of broadcast packets + in router mode. +* Added support for dotted quad notation in IPv6 (e.g. ::1.2.3.4). +* Improved format of printed Subnets, MAC and IPv6 addresses. +* Added a "--batch" option to force the tinc CLI to run in non-interactive + mode. +* Improve default Device selection on *BSD and Mac OS X. +* Allow running tinc without RSA keys. Thanks to Etienne Dechamps, Sven-Haegar Koch, William A. Kennington III, Baptiste Jonglez, Alexis Hildebrandt, Armin Fisslthaler, Franz Pletz, Alexander Ried and Saverio Proto for their contributions to this version of tinc. -Version 1.1pre10 February 7 2014 - - * Added a benchmark tool (sptps_speed) for the new protocol. - - * Fixed a crash when using Name = $HOST while $HOST is not set. - - * Use AES-256-GCM for the new protocol. - - * Updated support for Solaris. - - * Allow running tincd without a private ECDSA key present when - ExperimentalProtocol is not explicitly set. - - * Enable various compiler hardening flags by default. - - * Added support for a "conf.d" configuration directory. - - * Fix tinc-gui on Windows, also allowing it to connect to a 32-bits tincd when - tinc-gui is run in a 64-bits Python environment. - - * Added a "ListenAddress" option, which like BindToAddress adds more listening - address/ports, but doesn't bind to them for outgoing sockets. - - * Make invitations work better when the "invite" and "join" commands are not - run interactively. - - * When creating meta-connections to a node for which no Address statement is - specified, try to use addresses learned from other nodes. +# Version 1.1pre10 February 7 2014 + +* Added a benchmark tool (sptps_speed) for the new protocol. +* Fixed a crash when using Name = $HOST while $HOST is not set. +* Use AES-256-GCM for the new protocol. +* Updated support for Solaris. +* Allow running tincd without a private ECDSA key present when + ExperimentalProtocol is not explicitly set. +* Enable various compiler hardening flags by default. +* Added support for a "conf.d" configuration directory. +* Fix tinc-gui on Windows, also allowing it to connect to a 32-bits tincd when + tinc-gui is run in a 64-bits Python environment. +* Added a "ListenAddress" option, which like BindToAddress adds more listening + address/ports, but doesn't bind to them for outgoing sockets. +* Make invitations work better when the "invite" and "join" commands are not + run interactively. +* When creating meta-connections to a node for which no Address statement is + specified, try to use addresses learned from other nodes. Thanks to Dennis Joachimsthaler and Florent Clairambault for their contribution to this version of tinc. -Version 1.1pre9 September 8 2013 - - * The UNIX socket is now created before tinc-up is called. - - * Windows users can now use any extension that is in %PATHEXT% for scripts, - not only .bat. - - * Outgoing sockets are bound to the address of the listening sockets again, - when there is no ambiguity. - - * Added invitation-created and invitation-accepted scripts. - - * Invited nodes now learn of the Mode and Broadcast settings of the VPN. - - * Joining a VPN with an invitation now also works on Windows. - - * The port number tincd is listening on is now always included in the - invitation URL. - - * A running tincd is now correctly informed when a new invitation has been - generated. - - * Several bug fixes for the new protocol. - - * Added a test suite. +# Version 1.1pre9 September 8 2013 + +* The UNIX socket is now created before tinc-up is called. +* Windows users can now use any extension that is in %PATHEXT% for scripts, + not only .bat. +* Outgoing sockets are bound to the address of the listening sockets again, + when there is no ambiguity. +* Added invitation-created and invitation-accepted scripts. +* Invited nodes now learn of the Mode and Broadcast settings of the VPN. +* Joining a VPN with an invitation now also works on Windows. +* The port number tincd is listening on is now always included in the + invitation URL. +* A running tincd is now correctly informed when a new invitation has been + generated. +* Several bug fixes for the new protocol. +* Added a test suite. Thanks to Etienne Dechamps for his contribution to this version of tinc. -Version 1.1pre8 August 13 2013 - - * ExperimentalProtocol is now enabled by default. - - * Added an invitation protocol that makes it easy to invite new nodes. - - * Added the LocalDiscoveryAddress option to change the broadcast address used - to find local nodes. - - * Limit the rate of incoming meta-connections. +# Version 1.1pre8 August 13 2013 - * Many small bug fixes and code cleanups. +* ExperimentalProtocol is now enabled by default. +* Added an invitation protocol that makes it easy to invite new nodes. +* Added the LocalDiscoveryAddress option to change the broadcast address used + to find local nodes. +* Limit the rate of incoming meta-connections. +* Many small bug fixes and code cleanups. Thanks to Etienne Dechamps and Sven-Haegar Koch for their contributions to this version of tinc. -Version 1.1pre7 April 22 2013 - - * Fixed large latencies on Windows. - - * Renamed the tincctl tool to tinc. - - * Simplified changing the configuration using the tinc tool. - - * Added a full description of the ExperimentalProtocol to the manual. +# Version 1.1pre7 April 22 2013 - * Drop packets forwarded via TCP if they are too big (CVE-2013-1428). +* Fixed large latencies on Windows. +* Renamed the tincctl tool to tinc. +* Simplified changing the configuration using the tinc tool. +* Added a full description of the ExperimentalProtocol to the manual. +* Drop packets forwarded via TCP if they are too big (CVE-2013-1428). Thanks to Martin Schobert for auditing tinc and reporting the vulnerability. -Version 1.1pre6 February 20 2013 - - * Fixed tincd exitting immediately on Windows. - - * Detect PMTU increases. - - * Fixed crashes when using a SOCKS5 proxy. - - * Fixed control connection when using a proxy. - -Version 1.1pre5 January 20 2013 - - * Fixed long delays and possible hangs on Windows. - - * Fixed support for the tunemu device on iOS, the UML and VDE devices. - - * Small improvements to the documentation and error messages. - - * Fixed broadcast packets not reaching the whole VPN. - - * Tincctl now connects via a UNIX socket to the tincd on platforms that - support this. - - * The PriorityInheritance option now also works in switch mode. - -Version 1.1pre4 December 5 2012 - - * Added the "AutoConnect" option which will let tinc automatically select - which nodes to connect to. - - * Improved performance of VLAN-tagged IP traffic inside the VPN. - - * Ensured LocalDiscovery works with multiple BindToAddress statements and/or - IPv6-only LANs. - - * Dropped dependency on libevent. - - * Fixed Windows version not reading packets from the TAP adapter. - -Version 1.1pre3 October 14 2012 - - * New experimental protocol: - * Uses 521 bit ECDSA keys for authentication. - * Uses AES-256-CTR and HMAC-SHA256. - * Always provides perfect forward secrecy. - * Used for both meta-connections and VPN packets. - * VPN packets are encrypted end-to-end. - - * Many improvements to tincctl: - * "config" command shows/adds/changes configuration variables. - * "export" and "import" commands help exchange configuration files. - * "init" command sets up initial configuration files. - * "info" command shows details about a node, subnet or address. - * "log" command shows live log messages. - * Without a command it acts as a shell, with history and TAB completion. - * Improved starting/stopping tincd. - * Improved graph output. - - * When trying to directly send UDP packets to a node for which multiple - addresses are known, all of them are tried. - - * Many small fixes, code cleanups and documentation updates. - -Version 1.1pre2 July 17 2011 - - * .cookie files are renamed to .pid files, which are compatible with 1.0.x. - - * Experimental protocol enhancements that can be enabled with the option - ExperimentalProtocol = yes: - - * Ephemeral ECDH key exchange will be used for both the meta protocol and - UDP session keys. - * Key exchanges are signed with ECDSA. - * ECDSA public keys are automatically exchanged after RSA authentication if - nodes do not know each other's ECDSA public key yet. - -Version 1.1pre1 June 25 2011 - - * Control interface allows control of a running tinc daemon. Used by: - * tincctl, a commandline utility - * tinc-gui, a preliminary GUI implemented in Python/wxWidgets - - * Code cleanups and reorganization. - - * Repleacable cryptography backend, currently supports OpenSSL and libgcrypt. - - * Use libevent to handle I/O events and timeouts. - - * Use splay trees instead of AVL trees to manage internal datastructures. - - Thanks to Scott Lamb and Sven-Haegar Koch for their contributions to this - version of tinc. - -Version 1.0.22 August 13 2013 - - * Fixed the combination of Mode = router and DeviceType = tap. - - * The $NAME variable is now set in subnet-up/down scripts. +# Version 1.1pre6 February 20 2013 + +* Fixed tincd exitting immediately on Windows. +* Detect PMTU increases. +* Fixed crashes when using a SOCKS5 proxy. +* Fixed control connection when using a proxy. + +# Version 1.1pre5 January 20 2013 + +* Fixed long delays and possible hangs on Windows. +* Fixed support for the tunemu device on iOS, the UML and VDE devices. +* Small improvements to the documentation and error messages. +* Fixed broadcast packets not reaching the whole VPN. +* Tincctl now connects via a UNIX socket to the tincd on platforms that + support this. +* The PriorityInheritance option now also works in switch mode. + +# Version 1.1pre4 December 5 2012 + +* Added the "AutoConnect" option which will let tinc automatically select + which nodes to connect to. +* Improved performance of VLAN-tagged IP traffic inside the VPN. +* Ensured LocalDiscovery works with multiple BindToAddress statements and/or + IPv6-only LANs. +* Dropped dependency on libevent. +* Fixed Windows version not reading packets from the TAP adapter. + +# Version 1.1pre3 October 14 2012 + +* New experimental protocol: + * Uses 521 bit ECDSA keys for authentication. + * Uses AES-256-CTR and HMAC-SHA256. + * Always provides perfect forward secrecy. + * Used for both meta-connections and VPN packets. + * VPN packets are encrypted end-to-end. +* Many improvements to tincctl: + * "config" command shows/adds/changes configuration variables. + * "export" and "import" commands help exchange configuration files. + * "init" command sets up initial configuration files. + * "info" command shows details about a node, subnet or address. + * "log" command shows live log messages. + * Without a command it acts as a shell, with history and TAB completion. + * Improved starting/stopping tincd. + * Improved graph output. +* When trying to directly send UDP packets to a node for which multiple + addresses are known, all of them are tried. +* Many small fixes, code cleanups and documentation updates. + +# Version 1.1pre2 July 17 2011 + +* .cookie files are renamed to .pid files, which are compatible with 1.0.x. +* Experimental protocol enhancements that can be enabled with the option + ExperimentalProtocol = yes: + + * Ephemeral ECDH key exchange will be used for both the meta protocol and + UDP session keys. + * Key exchanges are signed with ECDSA. + * ECDSA public keys are automatically exchanged after RSA authentication if + nodes do not know each other's ECDSA public key yet. + +# Version 1.1pre1 June 25 2011 + +* Control interface allows control of a running tinc daemon. Used by: + * tincctl, a commandline utility + * tinc-gui, a preliminary GUI implemented in Python/wxWidgets +* Code cleanups and reorganization. +* Repleacable cryptography backend, currently supports OpenSSL and libgcrypt. +* Use libevent to handle I/O events and timeouts. +* Use splay trees instead of AVL trees to manage internal datastructures. + +Thanks to Scott Lamb and Sven-Haegar Koch for their contributions to this +version of tinc. - * Tinc now gives an error when unknown options are given on the command line. +# Version 1.0.22 August 13 2013 - * Tinc now correctly handles a space between a short command line option and - an optional argument. +* Fixed the combination of Mode = router and DeviceType = tap. +* The $NAME variable is now set in subnet-up/down scripts. +* Tinc now gives an error when unknown options are given on the command line. +* Tinc now correctly handles a space between a short command line option and + an optional argument. Thanks to Etienne Dechamps for his contribution to this version of tinc. -Version 1.0.21 April 22 2013 +# Version 1.0.21 April 22 2013 - * Drop packets forwarded via TCP if they are too big (CVE-2013-1428). +* Drop packets forwarded via TCP if they are too big (CVE-2013-1428). Thanks to Martin Schobert for auditing tinc and reporting this vulnerability. -Version 1.0.20 March 03 2013 - - * Use /dev/tap0 by default on FreeBSD and NetBSD when using switch mode. - - * Minor improvements and clarifications in the documentation. - - * Allow tinc to be cross-compiled with Android's NDK. - - * The discovered PMTU is now also applied to VLAN tagged traffic. - - * The LocalDiscovery option now makes use of all addresses tinc is bound to. - - * Fixed support for tunemu on iOS devices. - - * The PriorityInheritance option now also works with switch mode. +# Version 1.0.20 March 03 2013 - * Fixed tinc crashing when using a SOCKS5 proxy. +* Use /dev/tap0 by default on FreeBSD and NetBSD when using switch mode. +* Minor improvements and clarifications in the documentation. +* Allow tinc to be cross-compiled with Android's NDK. +* The discovered PMTU is now also applied to VLAN tagged traffic. +* The LocalDiscovery option now makes use of all addresses tinc is bound to. +* Fixed support for tunemu on iOS devices. +* The PriorityInheritance option now also works with switch mode. +* Fixed tinc crashing when using a SOCKS5 proxy. Thanks to Mesar Hameed, Vilbrekin and Martin Schürrer for their contributions to this version of tinc. -Version 1.0.19 June 25 2012 - - * Allow :: notation in IPv6 Subnets. - - * Add support for systemd style socket activation. - - * Allow environment variables to be used for the Name option. - - * Add basic support for SOCKS proxies, HTTP proxies, and proxying through an - external command. - -Version 1.0.18 March 25 2012 - - * Fixed IPv6 in switch mode by turning off DecrementTTL by default. - - * Allow a port number to be specified in BindToAddress, which also allows tinc - to listen on multiple ports. - - * Add support for multicast communication with UML/QEMU/KVM. - -Version 1.0.17 March 10 2012 - - * The DeviceType option can now be used to select dummy, raw socket, UML and - VDE devices without needing to recompile tinc. - - * Allow multiple BindToAddress statements. - - * Decrement TTL value of IPv4 and IPv6 packets. - - * Add LocalDiscovery option allowing tinc to detect peers that are behind the - same NAT. - - * Accept Subnets passed with the -o option when StrictSubnets = yes. - - * Disabling old RSA keys when generating new ones now also works properly on - Windows. - -Version 1.0.16 July 23 2011 - - * Fixed a performance issue with TCP communication under Windows. - - * Fixed code that, during network outages, would cause tinc to exit when it - thought two nodes with identical Names were on the VPN. - -Version 1.0.15 June 24 2011 - - * Improved logging to file. - - * Reduced amount of process wakeups on platforms which support pselect(). - - * Fixed ProcessPriority option under Windows. - - Thanks to Loïc Grenié for his contribution to this version of tinc. - -Version 1.0.14 May 8 2011 - - * Fixed reading configuration files that do not end with a newline. Again. - - * Allow arbitrary configuration options being specified on the command line. - - * Allow all options in both tinc.conf and the local host config file. - - * Configurable replay window, UDP send and receive buffers for performance tuning. - - * Try harder to get UDP communication back after falling back to TCP. - - * Initial support for attaching tinc to a VDE switch. - - * DragonFly BSD support. - - * Allow linking with OpenSSL 1.0.0. - - Thanks to Brandon Black, Julien Muchembled, Michael Tokarev, Rumko and Timothy - Redaelli for their contributions to this version of tinc. - -Version 1.0.13 Apr 11 2010 - - * Allow building tinc without LZO and/or Zlib. - - * Clamp MSS of TCP packets in both directions. - - * Experimental StrictSubnets, Forwarding and DirectOnly options, - giving more control over information and packets received from/sent to other - nodes. - - * Ensure tinc never sends symbolic names for ports over the wire. - -Version 1.0.12 Feb 3 2010 - - * Really allow fast roaming of hosts to other nodes in a switched VPN. - - * Fixes missing or incorrect environment variables when calling host-up/down - and subnet-up/down scripts in some cases. - - * Allow port to be specified in Address statements. - - * Clamp MSS of TCP packets to the discovered path MTU. - - * Let two nodes behind NAT learn each others current UDP address and port via - a third node, potentially allowing direct communications in a similar way to - STUN. - -Version 1.0.11 Nov 1 2009 - - * Fixed potential crash when the HUP signal is sent. - - * Fixes handling of weighted Subnets in switch and hub modes, preventing - unnecessary broadcasts. - - * Works around a MinGW bug that caused packets to Windows nodes to always be - sent via TCP. - - * Improvements to the PMTU discovery code, especially on Windows. - - * Use UDP again in certain cases where 1.0.10 was too conservative and fell - back to TCP unnecessarily. - - * Allow fast roaming of hosts to other nodes in a switched VPN. - -Version 1.0.10 Oct 18 2009 - - * Fixed potential crashes during shutdown and (in rare conditions) when other - nodes disconnected from the VPN. +# Version 1.0.19 June 25 2012 + +* Allow :: notation in IPv6 Subnets. +* Add support for systemd style socket activation. +* Allow environment variables to be used for the Name option. +* Add basic support for SOCKS proxies, HTTP proxies, and proxying through an + external command. + +# Version 1.0.18 March 25 2012 + +* Fixed IPv6 in switch mode by turning off DecrementTTL by default. +* Allow a port number to be specified in BindToAddress, which also allows tinc + to listen on multiple ports. +* Add support for multicast communication with UML/QEMU/KVM. + +# Version 1.0.17 March 10 2012 + +* The DeviceType option can now be used to select dummy, raw socket, UML and + VDE devices without needing to recompile tinc. +* Allow multiple BindToAddress statements. +* Decrement TTL value of IPv4 and IPv6 packets. +* Add LocalDiscovery option allowing tinc to detect peers that are behind the + same NAT. +* Accept Subnets passed with the -o option when StrictSubnets = yes. +* Disabling old RSA keys when generating new ones now also works properly on + Windows. + +# Version 1.0.16 July 23 2011 + +* Fixed a performance issue with TCP communication under Windows. +* Fixed code that, during network outages, would cause tinc to exit when it + thought two nodes with identical Names were on the VPN. + +# Version 1.0.15 June 24 2011 + +* Improved logging to file. +* Reduced amount of process wakeups on platforms which support pselect(). +* Fixed ProcessPriority option under Windows. + + Thanks to Loïc Grenié for his contribution to this version of tinc. + +# Version 1.0.14 May 8 2011 + +* Fixed reading configuration files that do not end with a newline. Again. +* Allow arbitrary configuration options being specified on the command line. +* Allow all options in both tinc.conf and the local host config file. +* Configurable replay window, UDP send and receive buffers for performance tuning. +* Try harder to get UDP communication back after falling back to TCP. +* Initial support for attaching tinc to a VDE switch. +* DragonFly BSD support. +* Allow linking with OpenSSL 1.0.0. + +Thanks to Brandon Black, Julien Muchembled, Michael Tokarev, Rumko and Timothy +Redaelli for their contributions to this version of tinc. + +# Version 1.0.13 Apr 11 2010 + +* Allow building tinc without LZO and/or Zlib. +* Clamp MSS of TCP packets in both directions. +* Experimental StrictSubnets, Forwarding and DirectOnly options, + giving more control over information and packets received from/sent to other + nodes. +* Ensure tinc never sends symbolic names for ports over the wire. + +# Version 1.0.12 Feb 3 2010 + +* Really allow fast roaming of hosts to other nodes in a switched VPN. +* Fixes missing or incorrect environment variables when calling host-up/down + and subnet-up/down scripts in some cases. +* Allow port to be specified in Address statements. +* Clamp MSS of TCP packets to the discovered path MTU. +* Let two nodes behind NAT learn each others current UDP address and port via + a third node, potentially allowing direct communications in a similar way to + STUN. + +# Version 1.0.11 Nov 1 2009 + +* Fixed potential crash when the HUP signal is sent. +* Fixes handling of weighted Subnets in switch and hub modes, preventing + unnecessary broadcasts. +* Works around a MinGW bug that caused packets to Windows nodes to always be + sent via TCP. +* Improvements to the PMTU discovery code, especially on Windows. +* Use UDP again in certain cases where 1.0.10 was too conservative and fell + back to TCP unnecessarily. +* Allow fast roaming of hosts to other nodes in a switched VPN. + +# Version 1.0.10 Oct 18 2009 + +* Fixed potential crashes during shutdown and (in rare conditions) when other + nodes disconnected from the VPN. +* Improved NAT handling: tinc now copes with mangled port numbers, and will + automatically fall back to TCP if direct UDP connection between nodes is not + possible. The TCPOnly option should not have to be used anymore. +* Allow configuration files with CRLF line endings to be read on UNIX. +* Disable old RSA keys when generating new ones, and raise the default size of + new RSA keys to 2048 bits. +* Many fixes in the path MTU discovery code, especially when Compression is + being used. +* Tinc can now drop privileges and/or chroot itself. +* The TunnelServer code now just ignores information from clients instead of + disconnecting them. +* Improved performance on Windows by using the new ProcessPriority option and + by making the handling of packets received from the TAP-Win32 adapter more + efficient. +* Code cleanups: tinc now follows the C99 standard, copyright headers have + been updated to include patch authors, checkpoint tracing and localisation + features have been removed. +* Support for (jailbroken) iPhone and iPod Touch has been added. + +Thanks to Florian Forster, Grzegorz Dymarek and especially Michael Tokarev for +their contributions to this version of tinc. + +# Version 1.0.9 Dec 26 2008 + +* Fixed tinc as a service under Windows 2003. +* Fixed reading configuration files that do not end with a newline. +* Fixed crashes in situations where hostnames could not be resolved or hosts + would disconnect at the same time as session keys were exchanged. +* Improved default settings of tun and tap devices on BSD platforms. +* Make IPv6 sockets bind only to IPv6 on Linux. +* Enable path MTU discovery by default. +* Fixed a memory leak that occured when connections were closed. + +Thanks to Max Rijevski for his contributions to this version of tinc. + +# Version 1.0.8 May 16 2007 + +* Fixed some memory and resource leaks. +* Made network sockets non-blocking under Windows. + +Thanks to Scott Lamb and "dnk" for their contributions to this version of tinc. + +# Version 1.0.7 Jan 5 2007 + +* Fixed a bug that caused slow network speeds on Windows. +* Fixed a bug that caused tinc unable to write packets to the tun device on + OpenBSD. + +# Version 1.0.6 Dec 18 2006 + +* More flexible detection of the LZO libraries when compiling. +* Fixed a bug where broadcasts in switch and hub modes sometimes would not + work anymore when part of the VPN had become disconnected from the rest. + +# Version 1.0.5 Nov 14 2006 + +* Lots of small fixes. +* Broadcast packets no longer grow in size with each hop. This should + fix switch mode (again). +* Generic host-up and host-down scripts. +* Optionally dump graph in graphviz format to a file or a script. +* Support LZO 2.0 and later. + +Thanks to Scott Lamb for his contributions to this version of tinc. + +# Version 1.0.4 May 4 2005 + +* Fix switch and hub modes. +* Optionally start scripts when a Subnet becomes (un)reachable. + +# Version 1.0.3 Nov 11 2004 + +* Show error message when failing to write a PID file. +* Ignore spaces at end of lines in config files. +* Fix handling of late packets. +* Unify BSD tun/tap device handling. This allows IPv6 on tun devices and + anything on tap devices as long as the underlying OS supports it. +* Handle IPv6 on Solaris tun devices. +* Allow tinc to work properly under Windows XP SP2. +* Allow VLAN tagged Ethernet frames in switch and hub mode. +* Experimental PMTUDiscovery, TunnelServer and BlockingTCP options. + +# Version 1.0.2 Nov 8 2003 + +* Fix address and hostname resolving under Windows. +* Remove warnings about non-existing scripts and unsupported address families. +* Use the event logger under Windows. +* Fix quoting of filenames and command line arguments under Windows. +* Strict checks for length incoming network packets and return values of + cryptographic functions, +* Fix a bug in metadata handling that made the tinc daemon abort. + +# Version 1.0.1 Aug 14 2003 + +* Allow empty lines in config files. +* Fix handling of spaces and backslashes in filenames under native Windows. +* Allow scripts to be executed under native Windows. +* Update documentation, make it less Linux specific. + +# Version 1.0 Aug 4 2003 + +* Lots of small bugfixes and code cleanups. +* Throughput doubled and latency reduced. +* Added support for LZO compression. +* No need to set MAC address or disable ARP anymore. +* Added support for Windows 2000 and XP, both natively and in a Cygwin + environment. + +# Version 1.0pre8 Sep 16 2002 + +* More fixes for subnets with prefixlength undivisible by 8. +* Added support for NetBSD and MacOS/X. +* Switched from undirected graphs to directed graphs to avoid certain race + conditions and improve scalability. +* Generalized broadcasting and forwarding of protocol messages. +* Cleanup of source code. + +# Version 1.0pre7 Apr 7 2002 + +* Don't do blocking read()s when getting a signal. +* Remove RSA key checking code, since it sometimes thinks perfectly good RSA + keys are bad. +* Fix handling of subnets when prefixlength isn't divisible by 8. + +# Version 1.0pre6 Mar 27 2002 + +* Improvement of redundant links: + * Non-blocking connects. + * Protocol broadcast messages can no longer go into an infinite loop. + * Graph algorithm updated to look harder for direct connections. +* Good support for routing IPv6 packets over the VPN. Works on Linux, + FreeBSD, possibly OpenBSD but not on Solaris. +* Support for tunnels over IPv6 networks. Works on all supported + operating systems. +* Optional compression of UDP connections using zlib. +* Optionally let UDP connections inherit TOS field of tunneled packets. +* Optionally start scripts when certain hosts become (un)reachable. + +# Version 1.0pre5 Feb 9 2002 + +* Security enhancements: + * Added sequence number and optional message authentication code to + the packets. + * Configurable encryption cipher and digest algorithms. +* More robust handling of dis- and reconnects. +* Added a "switch" and a "hub" mode to allow bridging setups. +* Preliminary support for routing of IPv6 packets. +* Supports Linux, FreeBSD, OpenBSD and Solaris. + +# Version 1.0pre4 Jan 17 2001 + +* Updated documentation; the documentation now reflects the + configuration as it is. +* Some internal changes to make tinc scale better for large + networks, such as using AVL trees instead of linked lists for the + connection list. +* RSA keys can be stored in separate files if needed. See the + documentation for more information. +* Tinc has now been reported to run on Linux PowerPC and FreeBSD x86. + +# Version 1.0pre3 Oct 31 2000 + +* The protocol has been redesigned, and although some details are + still under discussion, this is secure. Care has been taken to + resist most, if not all, attacks. +* Unfortunately this protocol is not compatible with earlier versions, + nor are earlier versions compatible with this version. Because the + older protocol has huge security flaws, we feel that not + implementing backwards compatibility is justified. +* Some data about the protocol: + * It uses public/private RSA keys for authentication (this is the + actual fix for the security hole). + * All cryptographic functions have been taken out of tinc, instead + it uses the OpenSSL library functions. + * Offers support for multiple subnets per tinc daemon. +* New is also the support for the universal tun/tap device. This + means better portability to FreeBSD and Solaris. +* Tinc is tested to compile on Solaris, Linux x86, Linux alpha. +* Tinc now uses the OpenSSL library for cryptographic operations. + More information on getting and installing OpenSSL is in the manual. + This also means that the GMP library is no longer required. +* Further, thanks to Enrique Zanardi, we have Spanish messages; Matias + Carrasco provided us with a Spanish translation of the manual. + +# Version 1.0pre2 May 31 2000 + +* This version has been internationalized; and a Dutch translation has + been included. +* Two configuration variables have been added: + * VpnMask - the IP network mask for the entire VPN, not just our + subnet (as given by MyVirtualIP). The Redhat and Debian packages + use this variable in their system startup scripts, but it is + ignored by tinc. + * Hostnames - if set to `yes', look up the names of IP addresses + trying to connect to us. Default set to `no', to prevent lockups + during lookups. +* The system startup scripts for Debian and Redhat use + /etc/tinc/nets.boot to find out which networks need to be started + during system boot. +* Fixes to prevent denial of service attacks by sending random data + after connecting (and even when the connection has been established), + either random garbage or just nonsensical protocol fields. +* Tinc will retry to connect upon startup, does not quit if it doesn't + work the first time. +* Hosts that are disconnected implicitly if we lose a connection get + deleted from the internal list, to prevent hogging eachother with + add and delete requests when the connection is restored. + +# Version 1.0pre1 May 12 2000 + +* New meta-protocol +* Various other bugfixes +* Documentation updates + +# Version 0.3.3 Feb 9 2000 + +* Fixed bug that made tinc stop working with latest kernels +* Updated the manual + +# Version 0.3.2 Nov 12 1999 + +* No more `Invalid filedescriptor' when working with multiple + connections. +* Forward unknown packets to uplink. + +# Version 0.3.1 Oct 20 1999 + +* Fixed a bug where tinc would exit without a trace. + +# Version 0.3 Aug 20 1999 + +* Pings now work immediately. +* All packet sizes get transmitted correctly. + +# Version 0.2.26 Aug 15 1999 + +* Fixed some remaining bugs. +* --sysconfdir works with configure. +* Last version before 0.3. + +# Version 0.2.25 Aug 8 1999 + +* Improved stability, going towards 0.3 now. + +# Version 0.2.24 Aug 7 1999 - * Improved NAT handling: tinc now copes with mangled port numbers, and will - automatically fall back to TCP if direct UDP connection between nodes is not - possible. The TCPOnly option should not have to be used anymore. +* Added key aging, there's a new config variable, KeyExpire. +* Updated man and info pages. - * Allow configuration files with CRLF line endings to be read on UNIX. +# Version 0.2.23 Aug 5 1999 - * Disable old RSA keys when generating new ones, and raise the default size of - new RSA keys to 2048 bits. +* All known bugs fixed, this is a candidate for 0.3. + +# Version 0.2.22 Apr 11 1999 - * Many fixes in the path MTU discovery code, especially when Compression is - being used. +* Multiconnection thing is now working nearly perfect :) - * Tinc can now drop privileges and/or chroot itself. +# Version 0.2.21 Apr 10 1999 - * The TunnelServer code now just ignores information from clients instead of - disconnecting them. - - * Improved performance on Windows by using the new ProcessPriority option and - by making the handling of packets received from the TAP-Win32 adapter more - efficient. - - * Code cleanups: tinc now follows the C99 standard, copyright headers have - been updated to include patch authors, checkpoint tracing and localisation - features have been removed. - - * Support for (jailbroken) iPhone and iPod Touch has been added. - - Thanks to Florian Forster, Grzegorz Dymarek and especially Michael Tokarev for - their contributions to this version of tinc. - -Version 1.0.9 Dec 26 2008 - - * Fixed tinc as a service under Windows 2003. - - * Fixed reading configuration files that do not end with a newline. - - * Fixed crashes in situations where hostnames could not be resolved or hosts - would disconnect at the same time as session keys were exchanged. - - * Improved default settings of tun and tap devices on BSD platforms. - - * Make IPv6 sockets bind only to IPv6 on Linux. - - * Enable path MTU discovery by default. - - * Fixed a memory leak that occured when connections were closed. - - Thanks to Max Rijevski for his contributions to this version of tinc. - -Version 1.0.8 May 16 2007 - - * Fixed some memory and resource leaks. - - * Made network sockets non-blocking under Windows. - - Thanks to Scott Lamb and "dnk" for their contributions to this version of tinc. - -Version 1.0.7 Jan 5 2007 - - * Fixed a bug that caused slow network speeds on Windows. - - * Fixed a bug that caused tinc unable to write packets to the tun device on - OpenBSD. - -Version 1.0.6 Dec 18 2006 - - * More flexible detection of the LZO libraries when compiling. - - * Fixed a bug where broadcasts in switch and hub modes sometimes would not - work anymore when part of the VPN had become disconnected from the rest. - -Version 1.0.5 Nov 14 2006 - - * Lots of small fixes. - - * Broadcast packets no longer grow in size with each hop. This should - fix switch mode (again). - - * Generic host-up and host-down scripts. - - * Optionally dump graph in graphviz format to a file or a script. - - * Support LZO 2.0 and later. - - Thanks to Scott Lamb for his contributions to this version of tinc. - -Version 1.0.4 May 4 2005 - - * Fix switch and hub modes. - - * Optionally start scripts when a Subnet becomes (un)reachable. - -Version 1.0.3 Nov 11 2004 - - * Show error message when failing to write a PID file. - - * Ignore spaces at end of lines in config files. - - * Fix handling of late packets. - - * Unify BSD tun/tap device handling. This allows IPv6 on tun devices and - anything on tap devices as long as the underlying OS supports it. - - * Handle IPv6 on Solaris tun devices. - - * Allow tinc to work properly under Windows XP SP2. - - * Allow VLAN tagged Ethernet frames in switch and hub mode. - - * Experimental PMTUDiscovery, TunnelServer and BlockingTCP options. - -Version 1.0.2 Nov 8 2003 - - * Fix address and hostname resolving under Windows. - - * Remove warnings about non-existing scripts and unsupported address families. - - * Use the event logger under Windows. - - * Fix quoting of filenames and command line arguments under Windows. - - * Strict checks for length incoming network packets and return values of - cryptographic functions, - - * Fix a bug in metadata handling that made the tinc daemon abort. - -Version 1.0.1 Aug 14 2003 - - * Allow empty lines in config files. - - * Fix handling of spaces and backslashes in filenames under native Windows. - - * Allow scripts to be executed under native Windows. - - * Update documentation, make it less Linux specific. - -Version 1.0 Aug 4 2003 - - * Lots of small bugfixes and code cleanups. - - * Throughput doubled and latency reduced. - - * Added support for LZO compression. - - * No need to set MAC address or disable ARP anymore. - - * Added support for Windows 2000 and XP, both natively and in a Cygwin - environment. - -Version 1.0pre8 Sep 16 2002 - - * More fixes for subnets with prefixlength undivisible by 8. - - * Added support for NetBSD and MacOS/X. - - * Switched from undirected graphs to directed graphs to avoid certain race - conditions and improve scalability. - - * Generalized broadcasting and forwarding of protocol messages. - - * Cleanup of source code. - -Version 1.0pre7 Apr 7 2002 - - * Don't do blocking read()s when getting a signal. - - * Remove RSA key checking code, since it sometimes thinks perfectly good RSA - keys are bad. - - * Fix handling of subnets when prefixlength isn't divisible by 8. - -Version 1.0pre6 Mar 27 2002 - - * Improvement of redundant links: - * Non-blocking connects. - * Protocol broadcast messages can no longer go into an infinite loop. - * Graph algorithm updated to look harder for direct connections. - - * Good support for routing IPv6 packets over the VPN. Works on Linux, - FreeBSD, possibly OpenBSD but not on Solaris. - - * Support for tunnels over IPv6 networks. Works on all supported - operating systems. - - * Optional compression of UDP connections using zlib. - - * Optionally let UDP connections inherit TOS field of tunneled packets. - - * Optionally start scripts when certain hosts become (un)reachable. - -Version 1.0pre5 Feb 9 2002 - - * Security enhancements: - * Added sequence number and optional message authentication code to - the packets. - * Configurable encryption cipher and digest algorithms. - - * More robust handling of dis- and reconnects. - - * Added a "switch" and a "hub" mode to allow bridging setups. - - * Preliminary support for routing of IPv6 packets. - - * Supports Linux, FreeBSD, OpenBSD and Solaris. - -Version 1.0pre4 Jan 17 2001 - - * Updated documentation; the documentation now reflects the - configuration as it is. - - * Some internal changes to make tinc scale better for large - networks, such as using AVL trees instead of linked lists for the - connection list. - - * RSA keys can be stored in separate files if needed. See the - documentation for more information. - - * Tinc has now been reported to run on Linux PowerPC and FreeBSD x86. - -Version 1.0pre3 Oct 31 2000 - - * The protocol has been redesigned, and although some details are - still under discussion, this is secure. Care has been taken to - resist most, if not all, attacks. - - * Unfortunately this protocol is not compatible with earlier versions, - nor are earlier versions compatible with this version. Because the - older protocol has huge security flaws, we feel that not - implementing backwards compatibility is justified. - - * Some data about the protocol: - * It uses public/private RSA keys for authentication (this is the - actual fix for the security hole). - * All cryptographic functions have been taken out of tinc, instead - it uses the OpenSSL library functions. - * Offers support for multiple subnets per tinc daemon. - - * New is also the support for the universal tun/tap device. This - means better portability to FreeBSD and Solaris. - - * Tinc is tested to compile on Solaris, Linux x86, Linux alpha. - - * Tinc now uses the OpenSSL library for cryptographic operations. - More information on getting and installing OpenSSL is in the manual. - This also means that the GMP library is no longer required. - - * Further, thanks to Enrique Zanardi, we have Spanish messages; Matias - Carrasco provided us with a Spanish translation of the manual. - -Version 1.0pre2 May 31 2000 - - * This version has been internationalized; and a Dutch translation has - been included. - - * Two configuration variables have been added: - * VpnMask - the IP network mask for the entire VPN, not just our - subnet (as given by MyVirtualIP). The Redhat and Debian packages - use this variable in their system startup scripts, but it is - ignored by tinc. - * Hostnames - if set to `yes', look up the names of IP addresses - trying to connect to us. Default set to `no', to prevent lockups - during lookups. - - * The system startup scripts for Debian and Redhat use - /etc/tinc/nets.boot to find out which networks need to be started - during system boot. - - * Fixes to prevent denial of service attacks by sending random data - after connecting (and even when the connection has been established), - either random garbage or just nonsensical protocol fields. - - * Tinc will retry to connect upon startup, does not quit if it doesn't - work the first time. - - * Hosts that are disconnected implicitly if we lose a connection get - deleted from the internal list, to prevent hogging eachother with - add and delete requests when the connection is restored. - -Version 1.0pre1 May 12 2000 - - * New meta-protocol - - * Various other bugfixes - - * Documentation updates - -Version 0.3.3 Feb 9 2000 - - * Fixed bug that made tinc stop working with latest kernels - - * Updated the manual - -Version 0.3.2 Nov 12 1999 - - * No more `Invalid filedescriptor' when working with multiple - connections. - - * Forward unknown packets to uplink. - -Version 0.3.1 Oct 20 1999 - - * Fixed a bug where tinc would exit without a trace. - -Version 0.3 Aug 20 1999 - - * Pings now work immediately. - - * All packet sizes get transmitted correctly. - -Version 0.2.26 Aug 15 1999 - - * Fixed some remaining bugs. - - * --sysconfdir works with configure. - - * Last version before 0.3. - -Version 0.2.25 Aug 8 1999 - - * Improved stability, going towards 0.3 now. - -Version 0.2.24 Aug 7 1999 - - * Added key aging, there's a new config variable, KeyExpire. - - * Updated man and info pages. - -Version 0.2.23 Aug 5 1999 - - * All known bugs fixed, this is a candidate for 0.3. - -Version 0.2.22 Apr 11 1999 - - * Multiconnection thing is now working nearly perfect :) - -Version 0.2.21 Apr 10 1999 - - * You shouldn't notice a thing, but a lot has changed wrt key +* You shouldn't notice a thing, but a lot has changed wrt key management - except that it refuses to talk to versions < 0.2.20 -Version 0.2.19 Apr 3 1999 - - * Don't install a libcipher.so. - -Version 0.2.18 Apr 3 1999 - - * Blowfish library dynamically loaded upon execution. - - * Included Eric Young's IDEA library. - -Version 0.2.17 Apr 1 1999 - - * Tincd now re-executes itself in case of a segmentation fault. - -Version 0.2.16 Apr 1 1999 - - * Wrote tincd.conf(5) man page, which still needs a lot of work. +# Version 0.2.19 Apr 3 1999 - * Config file now accepts and tolerates spaces, and any integer base - for integer variables, and better error reporting. See - doc/tincd.conf.sample for an example. +* Don't install a libcipher.so. -Version 0.2.15 Mar 29 1999 +# Version 0.2.18 Apr 3 1999 - * Fixed bugs. +* Blowfish library dynamically loaded upon execution. +* Included Eric Young's IDEA library. -Version 0.2.14 Feb 10 1999 +# Version 0.2.17 Apr 1 1999 - * Added --timeout flag and PingTimeout configuration. - * Did some first syslog cleanup work. +* Tincd now re-executes itself in case of a segmentation fault. -Version 0.2.13 Jan 23 1999 +# Version 0.2.16 Apr 1 1999 - * Bugfixes. +* Wrote tincd.conf(5) man page, which still needs a lot of work. +* Config file now accepts and tolerates spaces, and any integer base + for integer variables, and better error reporting. See + doc/tincd.conf.sample for an example. -Version 0.2.12 Jan 23 1999 +# Version 0.2.15 Mar 29 1999 - * Fixed nauseating bug so that it would crash whenever a connection - got lost. +* Fixed bugs. -Version 0.2.11 Jan 22 1999 +# Version 0.2.14 Feb 10 1999 - * Framework for multiple connections has been done. +* Added --timeout flag and PingTimeout configuration. +* Did some first syslog cleanup work. - * Simple manpage for tincd. +# Version 0.2.13 Jan 23 1999 -Version 0.2.10 Jan 18 1999 +* Bugfixes. - * Passphrase support added. +# Version 0.2.12 Jan 23 1999 -Version 0.2.9 Jan 13 1999 +* Fixed nauseating bug so that it would crash whenever a connection + got lost. - * Bugs fixed. +# Version 0.2.11 Jan 22 1999 -Version 0.2.8 Jan 11 1999 +* Framework for multiple connections has been done. +* Simple manpage for tincd. - * A reworked protocol version. +# Version 0.2.10 Jan 18 1999 - * A ping/pong system. +* Passphrase support added. - * More reliable networking code. +# Version 0.2.9 Jan 13 1999 - * Automatic reconnection. +* Bugs fixed. - * Still does not work with more than one connection :) +# Version 0.2.8 Jan 11 1999 - * Strips MAC addresses before sending, so there's less overhead, and - less redundancy. +* A reworked protocol version. +* A ping/pong system. +* More reliable networking code. +* Automatic reconnection. +* Still does not work with more than one connection :) +* Strips MAC addresses before sending, so there's less overhead, and + less redundancy. -Version 0.2.7 Jan 3 1999 +# Version 0.2.7 Jan 3 1999 - * Several updates to make extending more easy. +* Several updates to make extending more easy. -Version 0.2.6 Dec 20 1998 +# Version 0.2.6 Dec 20 1998 - * Point-to-Point connections have been established, including - Blowfish encryption and a secret key-exchange. +* Point-to-Point connections have been established, including + Blowfish encryption and a secret key-exchange. -Version 0.2.5 Dec 16 1998 +# Version 0.2.5 Dec 16 1998 - * Project renamed to tinc, in honour of TINC. +* Project renamed to tinc, in honour of TINC. -Version 0.2.4 Dec 16 1998 +# Version 0.2.4 Dec 16 1998 - * Now it really does ;) +* Now it really does ;) -Version 0.2.3 Nov 24 1998 +# Version 0.2.3 Nov 24 1998 - * It sort of works now. +* It sort of works now. -Version 0.2.2 Nov 20 1998 +# Version 0.2.2 Nov 20 1998 - * Uses GNU gmp. +* Uses GNU gmp. -Version 0.2.1 Nov 14 1998 +# Version 0.2.1 Nov 14 1998 - * Bare version. +* Bare version. diff --git a/README b/README index 542699fb..102774cc 100644 --- a/README +++ b/README @@ -1,11 +1,7 @@ This is the README file for tinc version 1.1pre11. Installation instructions may be found in the INSTALL file. -tinc is Copyright (C) 1998-2014 by: - -Ivo Timmermans, -Guus Sliepen , -and others. +tinc is Copyright © 1998-2016 Ivo Timmermans, Guus Sliepen , and others. For a complete list of authors see the AUTHORS file. @@ -49,15 +45,14 @@ Requirements In order to compile tinc, you will need a GNU C compiler environment. Please ensure you have the latest stable versions of all the required libraries: -- OpenSSL (http://www.openssl.org/) version 1.0.0 or later, with support for - elliptic curve cryptography (ECC) and Galois counter mode (GCM) enabled. +- LibreSSL (http://www.libressl.org/) or OpenSSL (https://openssl.org/) version 1.0.0 or later. The following libraries are used by default, but can be disabled if necessary: -- zlib (http://www.gzip.org/zlib/) -- lzo (http://www.oberhumer.com/opensource/lzo/) +- zlib (http://www.zlib.net/) +- LZO (https://www.oberhumer.com/opensource/lzo/) - ncurses (http://invisible-island.net/ncurses/) -- readline (ftp://ftp.gnu.org/pub/gnu/readline/) +- readline (https://cnswww.cns.cwru.edu/php/chet/readline/rltop.html) Features @@ -70,12 +65,12 @@ those nodes, tinc will learn about all other nodes on the VPN, and will make connections automatically. When direct connections are not possible, data will be forwarded by intermediate nodes. -By default, nodes authenticate each other using 2048 bit RSA (or 521 bit -ECDSA*) keys. Traffic is encrypted using Blowfish in CBC mode (or AES-256 in -GCM mode*), authenticated using HMAC-SHA1 (or GCM*), and is protected against -replay attacks. - -*) When using the ExperimentalProtocol option. +Tinc 1.1 support two protocols. The first is a legacy protocol that provides +backwards compatibility with tinc 1.0 nodes, and which by default uses 2048 bit +RSA keys for authentication, and encrypts traffic using Blowfish in CBC mode +and HMAC-SHA1. The second is a new protocol which uses Curve25519 keys for +authentication, and encrypts traffic using Chacha20-Poly1305, and provides +forward secrecy. Tinc fully supports IPv6. diff --git a/README.android b/README.android index 6fffe418..7d8e853f 100644 --- a/README.android +++ b/README.android @@ -1,20 +1,23 @@ -Quick how-o cross compile tinc for android (done from $HOME/android/): +Quick how-to cross compile tinc for Android (done from $HOME/android/): -- Download android NDK and setup local ARM toolchain: -wget http://dl.google.com/android/ndk/android-ndk-r8b-linux-x86.tar.bz2 -tar xfj android-ndk-r8b-linux-x86.tar.bz2 -./android-ndk-r8b/build/tools/make-standalone-toolchain.sh --platform=android-5 --install-dir=/tmp/my-android-toolchain +- Download Android NDK and setup local ARM toolchain: -- Download and cross-compile openSSL for ARM: -wget http://www.openssl.org/source/openssl-1.0.1c.tar.gz -tar xfz openssl-1.0.1c.tar.gz -cd openssl-1.0.1c -./Configure dist -make CC=/tmp/my-android-toolchain/bin/arm-linux-androideabi-gcc AR="/tmp/my-android-toolchain/bin/arm-linux-androideabi-ar r" RANLIB=/tmp/my-android-toolchain/bin/arm-linux-androideabi-ranlib + wget http://dl.google.com/android/ndk/android-ndk-r8b-linux-x86.tar.bz2 + tar xfj android-ndk-r8b-linux-x86.tar.bz2 + ./android-ndk-r8b/build/tools/make-standalone-toolchain.sh --platform=android-5 --install-dir=/tmp/my-android-toolchain + +- Download and cross-compile OpenSSL for ARM: + + wget http://www.openssl.org/source/openssl-1.0.1c.tar.gz + tar xfz openssl-1.0.1c.tar.gz + cd openssl-1.0.1c + ./Configure dist + make CC=/tmp/my-android-toolchain/bin/arm-linux-androideabi-gcc AR="/tmp/my-android-toolchain/bin/arm-linux-androideabi-ar r" RANLIB=/tmp/my-android-toolchain/bin/arm-linux-androideabi-ranlib - Clone and cross-compile tinc: -git clone git://tinc-vpn.org/tinc -cd tinc -autoreconf -fsi -CC=/tmp/my-android-toolchain/bin/arm-linux-androideabi-gcc ./configure --host=arm-linux --disable-lzo --with-openssl-lib=$HOME/android/openssl-1.0.1c --with-openssl-include=$HOME/android/openssl-1.0.1c/include/ -make -j5 + + git clone git://tinc-vpn.org/tinc + cd tinc + autoreconf -fsi + CC=/tmp/my-android-toolchain/bin/arm-linux-androideabi-gcc ./configure --host=arm-linux --disable-lzo --with-openssl-lib=$HOME/android/openssl-1.0.1c --with-openssl-include=$HOME/android/openssl-1.0.1c/include/ + make -j5 diff --git a/README.git b/README.git index 1c191abf..b699b581 100644 --- a/README.git +++ b/README.git @@ -1,9 +1,9 @@ Before you can start compiling tinc from a fresh git clone, you have to install the very latest versions of the following packages: -- OpenSSL +- LibreSSL or OpenSSL - zlib -- lzo +- LZO - GCC - automake - autoconf @@ -13,14 +13,14 @@ to install the very latest versions of the following packages: Then you have to let the autotools create all the autogenerated files, using this command: -autoreconf -fsi + autoreconf -fsi If you change configure.in or any Makefile.am file, you will have to rerun autoreconf. After this, you can run configure and make as usual. To create a tarball suitable for release, run: -make dist + make dist To clean up your working copy so that no autogenerated files remain, run: -git clean -f + git clean -f diff --git a/THANKS b/THANKS index a8d765c4..dfb03659 100644 --- a/THANKS +++ b/THANKS @@ -101,5 +101,6 @@ We would like to thank the following people for their contributions to tinc: And everyone we forgot (if we did, please let us know). Thank you! -Ivo Timmermans -Guus Sliepen +--- +Ivo Timmermans, +Guus Sliepen. -- 2.20.1