[[!meta title="installing tinc on Mac OS/X"]]
## Example: installing tinc on Mac OS/X
This example shows how to install and configure tinc on Mac OS X.
The following was tested on Snow Leopard based system, however should be
generalisable to other Apple systems as well.
This document is intended to give a step-by-step instruction on how
to install tinc and how to configure it to be used as a basic
client for tinc server.
[[!toc levels=3]]
### Overview and assumptions
The following documents is designed to allow you an easy and fast
installation/configuration of tinc. It deals with the client side
only and the assumption is that you have a tinc server configured
and running properly.
### Installing tinc
The recommended methods to install tinc is by using the macports port system.
The MacPorts Project is an open-source community initiative to design an easy-to-use system for compiling, installing, and upgrading either command-line, X11 or Aqua based open-source software on the MacOSX operating system.
Macports is recommended because it does not modify your system files. It keeps itself separate from your system.
#### MacPorts
XCode is a required prerequisite. It must be installed before installing Macports.
Download and install the Macports system from MacForge.
* [XCode](https://developer.apple.com/xcode/) (requires
free online ADC Membership); it can also be obtained from original
OSX installation DVD
* [Macports](http://www.macports.org/install.php)
After Macports is installed, close and reopen your terminal.
Update the ports system and ports list.
sudo port selfupdate
sudo port sync
This command will install tinc and all the necessary dependencies.
sudo port install tinc
Configuration files are located in /opt/local/etc/tinc.
Tinc can now be configured and executed.
### Start tinc automatically on system boot
[launchd](https://en.wikipedia.org/wiki/Launchd) is a system for monitoring services and make sure services are started if certain conditions are met. This system is available on OS X 10.5 and later versions.
To use launchd, you have to create a property-list file for tinc and put it under /Library/LaunchDaemons/
The following example is a plist file for the tinc network name: myvpn
*/Library/LaunchDaemons/myvpn.tinc.plist*:
```
KeepAlive
Label
tinc.myvpn
ProgramArguments
/opt/local/tinc/sbin/tincd
-n
myvpn
-D
```
This will configure tincd to start the myvpn configuration in the foreground (-D). If tincd is started as background daemon, launchd will not function correctly with tinc. Launchd will directly start tincd if this file is found. The `KeepAlive` element will ensure that tincd is always running, and to be restarted if it stops. To stop tincd, use the *launchctl* command. Some commands to remember are:
launchctl unload -w /Library/LaunchDaemons/myvpn.tinc.plist
This adds a *disabled* key to the file and stops tincd. The disabled key ensure that launchd will not start tincd anymore. The inverse operation is:
launchctl load -w /Library/LaunchDaemons/myvpn.tinc.plist
This removes the *disabled* key from the file and starts tincd.
To stop tinc:
launchctl stop tinc.myvpn
To list all services monitored by launchd:
launchctl list
If tinc has been configured with launchd, you will see tinc.myvpn listed with a process id.
#### Handle standby and other network interrupts
Tinc automatically tries to reconnect, but this takes time and the longer there
is no connection, the longer tinc waits to try and reconnect again. A small
tool is available at https://gitorious.org/tinc-on-osx/networknotify which will
signal tinc to reconnect when the network connection is available. It uses OS
X its network reachability framework and can be build using Xcode.
---
### Alternative Installation Methods
There are two alternative methods of getting tinc:
compiling it or downloading a precompiled binary.
The second option (download it) - is easier and faster way of
getting tinc to work.
#### Compile it
In the case of compiling tinc the following is required:
* [XCode](https://developer.apple.com/xcode/)
* [LZO libraries](http://www.oberhumer.com/opensource/lzo/)
Before starting, create a new folder `tmp` in your home directory
and enter it (it can be any other location). From Terminal level it
can be done in the following way:
[[!img examples/osx/tmp.png]]
##### LZO
Download LZO (you can use `wget` or Safari to do it). I used LZO
version 2.03 ("lzo-2.03.tar.gz"). Using `wget:`
[[!img examples/osx/lzo1.png]]
Unpack it, enter the directory:
[[!img examples/osx/lzo2.png]]
And issue `configure/make:`
[[!img examples/osx/lzo3.png]]
If everything goes well, after a few minutes the operation will be
finished, execute make install using root rights (using `sudo`
prefix):
[[!img examples/osx/lzo4.png]]
Having installed LZO, we can install tinc.
##### Tinc
Download Tinc (again you can use `wget` or Safari to do it). I used
[Tinc version 1.0.9](/packages/tinc-1.0.9.tar.gz). Using the same approach as
before - download and extract it:
[[!img examples/osx/tinc1.png]]
Enter the directory, and execute configure, make, make install:
[[!img examples/osx/tinc2.png]]
Having installed Tinc, you can move to the [next section](#config).
### Configuring tinc
Tinc on OS X looks for configuration files in `/usr/etc/tinc`. In
our case we will place configuration files in `~/Library/tinc/`.
Navigate to your home directory and create configuration folders
for your `company` (see manual for details). In my case it is
called `myvpn`.
[[!img examples/osx/config1.png]]
For further steps the following assumptions are made: the server to
connect to has name `myserver` and the client we are configuring:
`myclient0`.
You will need to create the following files and folders within:
- [[tinc.conf|examples/osx/tinc.conf]]
- [[tinc-up|examples/osx/tinc-up]]
- [[tinc-down|examples/osx/tinc-down]]
- [[hosts/myserver|examples/osx/myserver]]
- [[hosts/myclient0|examples/osx/myclient0]]
The sample files contain necessary explanation to make it work.
Make sure `tinc-up` and `tinc-down` are executable:
[[!img examples/osx/config2.png]]
You will also need to generate pair of keys (private/public) for
your client. Do it only after the above files are configured
properly! You will be asked for locations of certain files. The
default locations are fine.
[[!img examples/osx/config3.png]]
Once you are done, copy `hosts/myclient0` file and place it on your
server in the same location (`hosts/myclient0`). At this stage your
client should be able to connect to the server.
### Starting tinc
To start tinc everything you need is to execute:
[[!img examples/osx/start1.png]]
Tincd will issue a notice once it is successfully connected. For
more details on the syntax check `tincd --help`.
To stop the client you can kill it be executing:
[[!img examples/osx/start2.png]]
### Configuring tinc-up and tinc-down scripts
`tincd-up` and `tincd-down` are two files that tincd executes on
start of the service and on stop respectively. They are usually
used to notify system to use the vpn as a default gateway. The
files provided in the previous page are minimalistic and used only
to bring up and down the interface. If you would like to tunnel all
the traffic over vpn use the scripts provided below. You have to
modify them accordingly to your configuration. Please see the notes
inside them:
- [[tinc-up|examples/osx/tinc-up-1]] (Advanced example)
- [[tinc-down|examples/osx/tinc-down-1]] (Advanced example)
Please remember to rename the files to `tinc-up` and `tinc-down`
respectively and place them in your configuration folder replacing
the two existing files (if applicable).
* * * * *
- Mike Bentzen (mike (at) bentzen . com . au)
- Grzegorz Dymarek (gd58 (at) alumni . st-andrews . ac . uk)
- wizztick