tinc stopped working after restart

[Åsmund Rabbe]

All nodes was connected both 1.1pre10 and 1.1pre11 before "tinc -n vpn
restart" at Node 1.

Shouldnt at least the 1.1pre10 nodes connect again?

2015-05-18 23:39 GMT+02:00 Guus Sliepen <guus at tinc-vpn.org>:

> On Mon, May 18, 2015 at 11:04:09PM +0200, Åsmund Rabbe wrote:
>
> > One of the nodes (Node5) stopped working a while ago (2 - 3 weeks or so),
> > other than that everything was working fine. Today I decided to find the
> [...]
> > So I tried "tinc -n vpn restart". Then hell brakes loose...
> [...]
> > Node1 is Pre10
> > Node 14,15 and 16 is at 1.1Pre11
>
> I'm afraid that you cannot mix 1.1pre10 and 1.1pre11 nodes, unless you
> set ExperimentalProtocol = no. Either that, or make sure all nodes are
> running the same version.
>
> --
> Met vriendelijke groet / with kind regards,
>      Guus Sliepen <guus at tinc-vpn.org>
>
> _______________________________________________
> tinc mailing list
> tinc at tinc-vpn.org
> http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tinc-vpn.org/pipermail/tinc/attachments/20150519/4b25460e/attachment-0001.html>